tracking pixel
Marcel R

IKEA FADO funnel base transparent

by
Geoshape
Follow
Follow
Remix Model
Geoshape
Geoshape
|
Image 1 of 6
IKEA FADO funnel base transparent 3d model
Geoshape
Geoshape
|
Image 1 of 6
IKEA FADO funnel base transparent 3d model
2D
3D
Makes
IKEA FADO funnel base transparent 3d model
IKEA FADO funnel base transparent 3d model
IKEA FADO funnel base transparent 3d model
IKEA FADO funnel base transparent 3d model
IKEA FADO funnel base transparent 3d model
IKEA FADO funnel base transparent 3d model
This model is restricted by licensing terms. 

This amazing model is a showcase what is possible with vase mode printing!

Transform your ordinary Fado lamp into an art piece. With the use of transparent filament a big nozzle a "almost like glass"-effect is possible.

Print settings: Here is the setup I used. After that some comments Cura slicer 1.8mm CHT nozzle vase mode 1.5mm layer height 3mm line width 0 bottom layers build plate adhesion: none

To get a perfect result there might be some experimenting necessary. By extruding these thick layers you need to go very very slow (like 4mm/s). You need to use Cura as other slicers so not support these values. I haven't found a workaround for Bambulab printers... If you're not able to swap your nozzle or don't want to purchase one, you can achieve good results with a 0.8mm nozzle too (3mm line with, 0.8mm layer height) is possible....

Filament: For this particular one I used Spectrum PLA Crystal Clear. But I will do many more prints with Bambulabs PETG transparent. There will be videos on my instagram soon.


17 Likes33 DownloadsAugust 30, 2024


17 Likes33 DownloadsAugust 30, 2024
This model is restricted by licensing terms.