This is a stand for the Rigol DS1052E which is a snug fit to the base which lifts it off your desk and adds storage underneath it. This is a large print and will not fit on normal sized printers, e.g. MK4S/Bambu printers. It fits on a Prusa XL and other similarly sized printers.

This was produced via a scan with the Revopoint MetroX and reverse engineered in Quicksurface Pro, hence this is a premium model.

You will need the following to complete the build:

• Two M3 inserts (CNC Kitchen or Ruthex are the right size)
• Two M3x8 screws and washers

The inserts should be installed into the knobs, which are then attached to the drawers through the holes. My print used PETG-CF with a PLA support interface, which worked perfectly in the supplied Prusa XL configured file.

This is a multi-plate print to speed up the job if you are using different colours and requires PrusaSlicer 2.9.0 or newer which has just been released at the time of publishing.