This is a picture of the Hungarian parliament building taken from the river in Budapest on my honeymoon. This picture lends itself to looking awesome in Hueforge.

I used the following colours in this print, but any black, white, yellow and orange will probably work:

• PLA BambuLab Basic Black
• PLA BambuLab Basic Yellow
• PLA BambuLab Basic Orange
• PLA BambuLab Basic Jade White

Printing

Please note the slicer will give you a warning about floating regions. It is safe to ignore this.

There is a pre-configured 3MF for Bambu studio. Non-Bambu users can use the 3MF in conjunction with the Hueforge describe information to achieve the prints.

This Hueforge is setup to use a 0.2mm nozzle and expects a 0.1mm bottom layer and a 0.08mm layer height with 100% infill and 1 wall.

Note this one is pretty thin, so care in taking it off the bed! Fyrby Additive holds a commercial Hueforge license.

If you find this model useful it would be great if you can support me by subscribing to me here, if only for a month. Thank you!