tracking pixel
Jonathan P

FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE

by
FunPrints3D
Follow
Follow
Remix Model
FunPrints3D
FunPrints3D
|
Image 3 of 10
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FunPrints3D
FunPrints3D
|
Image 3 of 10
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
2D
3D
Makes
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model
This model is restricted by licensing terms. 

This is a fun flexi otter that I created. It has lots of articulation. You can pose him in many different ways.

To reposition his head up or down you can turn the head to about a 45 degree angle and simply slide the joint through. It can be snapped into position as well, but it might be less durable that way.

There is tight clearance on some of the sockets. Nothing should be fused, but they might be stiff at first. Gently wiggle them to free them if this is the case for you. Safe to scale down to 85%

Enjoy!

Print without supports, .15mm resolution, 3 outer walls and >15% infill.


17 Likes75 DownloadsMarch 15, 2024


17 Likes75 DownloadsMarch 15, 2024
This model is restricted by licensing terms.