tracking pixel
FourSideTriangle

Christmas Tree Star Topper [6Point]

by
FourSideTriangle
Follow
Follow
Remix Model
FourSideTriangle
FourSideTriangle
|
Image 1 of 15
Christmas Tree Star Topper [6Point] 3d model
FourSideTriangle
FourSideTriangle
|
Image 1 of 15
Christmas Tree Star Topper [6Point] 3d model
2D
3D
Makes
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
Christmas Tree Star Topper [6Point] 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6380574.

Christmas Tree Star Topper [6Point]


Will fit on a 220mm x 220mm bed (No skirt)

Assembly consisting of 6 parts Star_Body needs to be printed 2x Star_Sub_Inlay needs to be printed 2x

No Supports needed for any Parts

Recommended to print the Cylinder_Holder using Dark Green to blend into the tree Inlay colour is up to you, but I found blue went nicely with the white body (Another option might be red inlay with gold body)

Post Print: - All Star_* parts are to be glued together as shown in the photos (I recommend CA Glue) - Sand the joining edges where the halves join [Optional] - Customize the star using Sticker jewels [Optional]

Mounting the Star: - See Photo #2 to see how the Star stays on the top of the tree - Cylinder_Holder assembles to the Star with a dovetail, no glue/fastener necessary


Merry Christmas:)


1 Likes3 DownloadsDecember 17, 2023


1 Likes3 DownloadsDecember 17, 2023
This model is restricted by licensing terms.