This is an upgraded version of the flexi Whale Shark I published on Thingiverse. Joints are structured to move flexibly, and the mouth is also structured to open and close. It can also keep its mouth closed when placed on flat floor. https://www.thingiverse.com/thing:6574396 Speckled mesh has been added, and multi-printing can now reproduce whale sharks more realistically.
This model includes the following digital content 01: STL - Whale Shark 02: 3mf (Bambu)- Whale Shark 03: STL - Stand 04: 3mf (Bambu)- Stand 05: 3mf (Prusa)- Whale Shark 06: 3mf (Prusa)- Stand
02 and 04 are 3mf files for multi-color that are compatible with Bambu Studio, and 05 and 06 are 3mf files for Prusa Slicer. If you want to do multi-color prints, please use these files. Three types of whale shark 3mf files are available: "Low" is 3-color file with no pattern coloring, "Mid" is 3-color file with a pattern coloring, and "High" is 4-color file with the pattern and the underside of the body colored in different colors. The "Mid" file has regular coloring and can be used to reproduce common whale shark, while the "High" file can be used to create more artistic whale shark. However, in general, multi-printing produces amount of flushed filament(garbage) equal to the amount of filament needed for the model. For those who don't like this, I recommend the "Low" file. This file is colored to reduce the number of filament changes, although the coloring of the pattern is omitted, the pattern itself is represented by a mesh, so you can be assured of sufficient quality. Please multi-printing that suits you best.
Only stand needs to be assembled. Please refer to the second GIF and the 5th photo when assembling it. The stand also comes in two variations: regular one and simplified "Lite" version. The regular version is decorated with sunken ship and starfish, while the "Lite" version has simplified design for quick printing. Please choose whichever you prefer to use here as well.
Print in Place with no supports. Please take pictures of your Flexi and share them with us!
💰Commercial Use💰 This model is licensed for commercial use only as 3D printed without modification. The content of this license is the same as Cults' "CULTS CU-ND" and Printables Store's "CU-ND". Ex) Sell 3D printed Flexi on Etsy, flea markets, etc. For more information, please see the terms and conditions below. ↓CULTS CU-ND https://cults3d.com/en/licenses#cults_cu_nd ↓Printables Store CU-ND (See the “License” section.) https://www.printables.com/model/752042-flexi-leaf-dragon-mark-ii-setprint-in-place ⚠Attention⚠ Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes. (Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)
⚠Warning⚠ Be careful in environments with young children and pets! This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.
Do not apply strong force! Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.
Store them in an appropriate place. After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.
🖨Print Setting🧵 Rafts: No Supports: No Build Plate Adhesion Type: Skirt or None Layer Height: 0.1-0.3 mm Infill: 15-20% Filament material: PLA
{Recommend: Common Printer} Layer Height: 0.2mm Print Speed: 60mm/s Outer Wall Speed: 10mm/s Z Seam Alignment: User Specified Z Seam Position: Right Z Seam Corner Preference: Hide Seam
{Recommend: Bambu Lab Printer} Layer Height: 0.2mm Seam Position: Aligned Wall Loops: 3 First layer: 30mm/s Outer wall: 30mm/s Prime Tower Width: 10mm Prime Volume: 10mm^3 Prime Tower Brim Width: 0mm