Extra service "Humpback Whale Mark-Ⅱ" released!! https://cults3d.com/en/3d-model/art/flexi-humpback-whale-mark-print-in-place https://flexseedsshop.etsy.com/jp/listing/1676357665/flexi-humpback-whale-mark-2-stl-file-for If purchased, commercial use license and 3mf files are available.
This is new type Flexi Humpback Whale. The model has been changed to incorporate spherical joints and can also open and close its mouth. ↓Old Ver https://www.thingiverse.com/thing:6255454 Print in Place with no supports. It can be assembled simply by inserting the head part into the main body. Please take pictures of your Flexi and share them with us!
💰Commercial Use💰 This model is granted "CULTS CU-ND - COMMERCIAL USE - NO DERIVATIVE" and may be used commercially within the terms of use. Ex) Sell 3D printed Flexi on Etsy, flea markets, etc. For more information, please see the terms and conditions below. https://cults3d.com/en/licenses#cults_cu_nd ⚠Attention⚠ Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes. (Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)
⚠Warning⚠ Be careful in environments with young children and pets! This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.
Do not apply strong force! Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.
Store them in an appropriate place. After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.
🖨Print Setting🧵 Rafts: No Supports: No Build Plate Adhesion Type: Skirt or None Layer Height: 0.1-0.3mm Infill:15-20% Filament material: PLA
{Recommend} Layer Height: 0.2mm Print Speed: 60mm/s Outer Wall Speed: 10mm/s Z Seam Alignment: User Specified Z Seam Position: Right (Body), Left(Head) Z Seam Corner Preference: Hide Seam
{Recommend: Bambu Lab Printer} Layer Height: 0.2mm Seam Position: Aligned Wall Loops: 3 First layer: 30mm/s Outer wall: 30mm/s Prime Tower Width: 10mm Prime Volume: 10mm^3 Prime Tower Brim Width: 0mm