3D MODEL DESCRIPTION Highly flexible, super cute and supper easy to print - 100% print in place.
Comes with bambulab painted version and stl.
Easy to scale in size.
3D PRINTING SETTINGS Standard Bambu settings -
No brim required unless you have bad plate adhesion.
Model can be scaled - shown here is at 80% and works perfectly.
If scaled down - no general supports needed, but in your slicer, add tree supports, make sure remove small overhangs is not enabled and enable support critical regions only.
Printed with 2x 0.42mm walls and standard speed.
Gyroid infill recommended.
And that's it, have fun
Category:
7 Likes5 DownloadsJune 2, 2024