Try it here now for free! Basic sample pack available for everyone, consists of the basic neck chains, hook and pendant.
The full neck chain collection includes the basic, cyber and scaled neck chains and will be available on cults 3D or free for my subscribers along with commercial usage.
Each variant comes with 4 editions - 2x lengths, one with hook loop and the other without.
Also Included in the full is 4x pendants - the basic, blood, cutie and spike.
Comes with 3D printed hook or if you prefer to use a stronger hook I recommend these - https://www.amazon.co.uk/dp/B0D2L3W3X9?ref=ppx_yo2ov_dt_b_fed_asin_title
All optimised for silk and completely print in place with no supports or brim needed - I recommend the hook to be printed in a stronger filament however if you are using it.
Basic prints in approximately 1 hour.
Bambulab perfected print profile included.
Cyber bracelet in the full pack is designed to be printed using dual color when swapping filament at the layer height the stripes begin.
3D printing settings Note - maximum bed adhesion necessary, ensure your first layer is perfect and the rest should be easy.
Individual wall thickness - 0.3mm with 2x walls
Gyroid infill 15%
First layer speed - 10mm/s
Other layers approximately 40mm/s
Z-hop recommended on for travel distance greater than 0.2mm
Enjoy.