Available now for everyone to download for absolutely free!
Fast to print and easy to assemble, strong and portable - an addictive and advanced fidget based on the popular spiral fidgets also available now.
These work on a similar bases but with the added bonus of force feedback and a satisfying click.
Comes with keychain slot.
Available commercially for subscribers only.
Separate pieces assembled together easily can be printed easily in multiple colors.
Can be printed with or without the clicker if you don't wish to include the click function.
The spring required needs to be approximately 30mm long when uncompressed with a maximum diameter of 9mm (you can use smaller if available to you)
The clicker is a cherry mx (keyboard switch) these and the spring are easily available online, amazon etc... a tiny amount of glue is also required to hold the base in as the entire design is compact with no room for latches.
Easy to assemble, simply follow this video -
Print settings -
print slowly for better overhangs.
No support or brim necessary unless needed due to bed adhesion problems. I do recommend supports on the bottom centre in critical regions only, this is to help improve print quality.
Detect thin walls enabled if using the first top centre (the first is only to cover the spring if you wish, but not necessary, just print the one you prefer)
Any help required and I'll be sure to help as best as I can
0.42mm wall thickness, 2 should be fine but can be increased for strength.
Have fun and thank you for all the support, I will soon be releasing my new flexi that I have been working hard on for all subscribers, I know you will love it so don't forget to like and share.
Any help required and I'll be sure to help as best as I can