This is an angled build plate drip mount for the Mars 4 Max.  Printed and tested.  The portion that fits over the Z axis mounting post is tight by design.  The drip plate does not need to be removed between prints and the build plate fits in its working position while printing without interference from the drip mount. Thank you to u/redukt0r and u/wraith2626 on reddit for providing feedback on fitment. 

Drip Mount for Mars 4 Max Build Plate

Mars-4-Max-build-plate-drip-mount v4.3mf

Mars 4 Max Build Plate Drip Mount v4.stl

Vertical stand for M1/M2 Macbook Pro.
Printed in:

- PLA 
- 0.2mm layer height
- 10% Cubic Infill
- No Supports

Vertical Stand for M1/M2 Macbook Pro

Macbook_Pro_14-15inch_2021.stl

Macbook_Pro_16inch_2021.stl

I made this to hang my Thermapen One from the shelf hooks on the Kamado Joe Konnected.  Pretty sure this should work across all Kamado Joe's. The diameter hooks on the KJ is 6.0mm and the hole in the holster is 6.5mm, so it should fit any grill hook that is a similar size or smaller. 

Printed in the upright position with no supports
PETG
0.2mm Layer Height
15% infill
May reprint later with 6 perimeters if strength becomes an issue

Thermapen_One_Holster.stl

Custom rugged box for storing your Combustion Inc CPT probes, boosters, and display with a spot for charging cables.

There is an option for dual probe or single probe.  I used prusaslicer setup with 3 extruders to print the logo in color starting with the black lettering, then the red flame, and finally the rest of the box.  I used Overture Matte Yellow PLA, Overture Jeans Red PLA, and Overture Black PLA Pro.  I also used the Overture Black PLA Pro for the latches in hopes that they will stand up to the stress of repeated opening and closing over time.  For the gasket seal, I used a 95a shore TPU filament in black.  To assemble the box, I used 6 (six) M3x0.5x30mm machine screws with hex socket heads from amazon.  I purchased these specifically: https://www.amazon.com/dp/B07NSWS9MM?ref=ppx_yo2ov_dt_b_product_details&th=1 (not an affiliate link).  

I remixed this from the box that Whity posted on Printables and I'm adding my attribution to the remix here because the Thangs.com "inspiration and attribution" box won't accept the link.  You can find it here: https://www.printables.com/model/258431-rugged-box-parametric

Rugged Box for Combustion Inc. CPT

Single Probe Box Bottom.3mf

Box Latch x 2.3mf

Single Probe Box Lid.3mf

Dual Probe Box Bottom.3mf

Dual Probe Box Seal.3mf

Dual Probe Box Lid.3mf

Single Probe Box Seal TPU.3mf

https://www.printables.com/@FergyMcFerguson

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

FergyMcFerguson

Achievements

Seedling

Debutant

Novice Maker

Explorer