Minimal and functional, designed under the FORMAstudios label. Focused on clean geometry, everyday usability, and reliable 3D printing.

---

A wall-mounted bike storage solution that keeps your floor clear and your space clean. The TENSO wall mount holds your bike at a flat angle against the wall – out of the way, but always ready.

The kit consists of two brackets that sit on the wall and support the wheels, and a wall plate with a hook that attaches to the handlebar, seat post, or frame. Hook and wall plate are connected with a rope – simply tie a knot behind the plate and one at the hook. Trim the excess.

Note: Drilling required.

What you need

• Rope with a diameter of 6–8 mm
• M4 countersunk screws for the brackets

---

Print Instructions Layer height: 0.2 mm Walls: 3–4 Infill: 30–40% / 100% for the Wall Bracket and Hook Infill type: Gyroid Supports: None

---

Disclaimer Load capacity has not been formally tested. The built example holds my bikes that under 12 kg without issue. The brackets have been stood on by a person weighing 85 kg without failure. Build and use at your own risk.

---

The digital file may not be shared or redistributed.

---

FORMAstudios Minimal design objects for everyday use.