The ModuStack Drawer System is a fully expandable, 3D‑print‑optimized storage platform built for makers, technicians, and anyone who needs clean, modular organization. Each drawer module provides a generous 120 mm deep × 132 mm wide × 47.1 mm high internal compartment — ideal for tools, electronics, crafting supplies, fasteners, or desk essentials.

The system scales infinitely: add as many drawers as you want, stacking modules vertically using printed locking pegs. Each level is separated by a retaining divider, which stabilizes the tower and prevents drawer drift. Pegs press‑fit into place, and a small clamp can be used to fully seat them during assembly.

Only a dab of glue is required for the handle fascia, keeping the build simple and maintenance‑friendly. The top panel features a ventilated surface, reducing print time while giving the tower a clean, modern aesthetic.

Designed for strength, simplicity, and expandability, the ModuStack Drawer System adapts to your workflow — not the other way around.

3D printing settings:

Resolution: 0.2mm to 0.24mm (0.2mm for handle fascia) Infill: 15% - Gyroid Support: Yes, for drawer handles - Organic/Tree. First layer speed: 50mm/s First layers: 2

Materials:

PETG or PLA (PETG recommended)

Assembly:

1. Press pegs into peg holes of base.
2. Press first Stack Section onto base without divider.
3. Additional stacks require Stack Divider. Align to holes and press pegs through the divider into the stack section.
4. Add as many stack sections and dividers to the height you want it to be.
5. Add the Stack Top after the last divider.
6. Glue the Handle Fascia to the front of the handle in each drawer.