Industrial Style Shelving, Design one

Industrial style shelving, design one. other variants coming soon. other items in the images are not included

2 Versions included, one that fits larger build plates like h2d/h2c and one that fits the 256x256 build plate. with the description of parts large or small.

Prints in parts. The back has the screw hole mounts. The front is flipped so prints face down meaning the side that touches the build plate is the surface to see one assembled. Simply push all the supporting poles into the slots. I originally made wit 0.1mm tolerance which is a tight fit. however ive made it 0.16 for release. so should be an ok fit for most. but would probable need to glue. thye shelves should sit nicely on the rests once it is together but you can add a little glue. a couple f the shelves are very similar in size but they do only fit one slot each properly. you can print the shelfs flat or on there side. on the side is stronger. also there is minimal time difference between the two printing methods. while 15% infill is fine I would suggest a slightly higher infill for strength.

0.2 layer, no supports. the poles and shelves if printed on there side with auto generate a brim.