Heart Swing String Art For this valentines day i wanted to do another string art. Honestly i had no idea when i thought of this whether it would work but thankfully it did and it prints great. I goes with out saying the strings are delicate. There is always a chance that 1 or 2 may not catch, just trim these off. Ive doubled the strings from my first version. Slow down overhangs to 10mm/s to give the strings the best chance. Be careful when removing from the plate. The heart couple… they have slots on the under side which seat nicely on the swing. Its intended to not be a tight fit so you don't have to fiddle to much with clipping on. they just slot in freely but do keep the heart couple in place. As usual they are made of multiple bodies in the one stl to allow for easy coloring. Heart string art, must be 0.2 layer height. Walls must be set to archane, 15% infill to make sure there is enough for strings to grip. The heart couple, 0.2 layer height. 10% infill. I also printed with adaptive layer height to make them as smooth as possible