Bearing Fidget spinner
A simple spinner.
Print in place
The bearings require very small supports to keep in place while printing and good adhesion is a must.
Supports should come away easily after printing and give the bearings a little tidy up after.
There is a fairly generous tolerance for the bearings to allow for easy spinning.
included in the 3mf i have activated the adaptive layer height to smooth out the bearings. this does add some print time and you can turn off if you wish.
It can be printed in 0.2 and 0.16 layer height
Category:
2 Likes2 DownloadsOctober 12, 2024