tracking pixel
Profile Image
EngineerMeThis
EngineerMeThis

EngineerMeThis

Welcome to EMT, A place for practical useful models and designs that can be used around the house, workshop and office. You will not find any toys on our page.

We do have Etsy Shop for most of our items but it is not our main focus, all designs are available for outright purchase if you have commercial objectives and requests are welcome.

https://engineermethis.etsy.com

We are setting up a monthly membership and if you want to support us plus get access to the 5 files we will do per month for personal and commercial use please like, follow and stay tuned for the launch.

Follow

Select a membership plan

Commercial License Plan
$10.00
/ month

So you all have been asking, So here we are. Although I will carry on uploading models for everyone enjoyment, if you want or need to sell any of these models, this is the honest way of doing so, I will strive to upload at least 5 new models each month and paying members gets to request changes for considerations.

IoT M

TurtleSkin_Vase

by
EngineerMeThis
Follow
Follow
Remix Model
EngineerMeThis
EngineerMeThis
|
Image 1 of 4
TurtleSkin_Vase 3d model
EngineerMeThis
EngineerMeThis
|
Image 1 of 4
TurtleSkin_Vase 3d model
2D
3D
Makes
TurtleSkin_Vase 3d model
TurtleSkin_Vase 3d model
TurtleSkin_Vase 3d model
TurtleSkin_Vase 3d model

Simple model meant to be printed in Vase Mode, I tried fuzzy skin and seems to have worked out well. ( FuzzySkin is a setting int Prusa, ) you can print it in smooth or fuzzy skin, 0.4mm or 0.6mm nozzle recommended

PETG or ASA is recommended. If a watertight seal is required, I suggest coating the inside with epoxy brush coat.

110x210mm (4x8") 0.4mm nozzle 0.2mm layer height


10 Likes7 DownloadsMarch 15, 2024



10 Likes7 DownloadsMarch 15, 2024