**IMPERIAL CHESS SET**
- High-quality 3D scan of antique Ottoman chess pieces
 
**Print Instructions & Recommendations**
- Support is **required** for high quality results.
- 3MF files with optimized settings included in the model files.
 
**Model Information**
- **Dimensions (X-Y-Z) | Standard:** 35-36 x 35-41 x 60~87 mm
- **Dimensions (X-Y-Z) | Mini:** 26-27 x 26-11 x 45~66 mm
- **Commercial Use:** Personal use only. Patreon licensing does not grant commercial rights.

Imperial Chess Set

Imperial Chess Set (Standard - King).stl

**CHESS VOYAGE**
- Modern take on chess that blends aesthetics with functionality
- Smooth folding mechanism ensures quick setup and effortless storage anytime
- Travel-friendly design, with available embedded magnet versions for improved stability
- Features two new piece designs _(standard and magnet versions only)_
- Includes a Braille version as well

**What is “Braille Chess” version?**
Braille chess is a specially adapted version of chess designed for **visually impaired players.** It follows standard chess rules but includes **specific modifications** to make the board and pieces identifiable through touch:
- **Board Navigation:** Dark squares are elevated approximately 4mm higher than light squares, providing a clear tactile distinction for easy identification.
- **Piece Recognition:** Each chess piece retains its standard design, similar to the Staunton shape, ensuring players can easily differentiate them.
- **Side Distinction:** Dark pieces feature slight spikes on top, allowing them to be distinguished from light pieces.
- **Piece Stability:** A peg-and-hole system is used, where each chess piece has a small peg at the bottom that fits into holes on the board, preventing accidental movement.

**Print Instructions & Recommendations**
- It is **highly recommended** to clean the build plate with warm water and soap prior to printing to eliminate the potential adhesion problems. 
- Support is **only required** for the pieces in the **Braille** version. Every other part of the model should be printed **without supports**.
- STLs for large, mini, and Braille versions, along with 3MF files with optimized settings, are included in the model files.

**Assembly Instructions**
- Assembly requires **no additional** tools, materials or post-processing for **standard** versions. It is a simple print and play model.
- **Braille version** would only require the removal of the supports for the chess pieces.
- For **embedded magnet versions**:
- - Each print profile includes 8 plates. Caps and checker pieces do not have magnet slots and should be printed in all cases. The remaining 6 plates are for the board and pieces, designed for two magnet sizes: **8x2mm** and **6x2mm**. To ensure compatibility, select and print only two plates, one for the board and one for the pieces, that match your chosen magnet size.
- - During printing, the profile will **pause automatically** at the designated layer, allowing you to insert the magnets before resuming. If your nozzle is **magnetic**, it may pull the magnets out of the slots when printing continues. To prevent this, apply a small amount of **glue** before resuming to secure the magnets in place.

**Model Information**
- **Dimensions (X-Y-Z) | Large ~ Board:** 235 x 235 x 12.3 mm
- **Dimensions (X-Y-Z) | Large ~ Modern Chess Pieces:** 17.9 x 17-22 x 33-55 mm
- **Dimensions (X-Y-Z) | Large ~ Classic Chess Pieces:** 18-21 x 17-24 x 32-65 mm
- **Dimensions (X-Y-Z) | Large ~ Checker Pieces:** 20.7 x 20.7 x 5.2 mm
- **Dimensions (X-Y-Z) | Standard ~ Board:** 200 x 200 x 10.5 mm
- **Dimensions (X-Y-Z) | Standard ~ Modern Chess Pieces:** 15.2 x 14-19 x 28-47 mm
- **Dimensions (X-Y-Z) | Standard ~ Classic Chess Pieces:** 15-18 x 14-21 x 27-55 mm
- **Dimensions (X-Y-Z) | Standard ~ Checker Pieces:** 16.9 x 16.9 x 4.2 mm
- **Dimensions (X-Y-Z) | Mini ~ Board:** 160 x 160 x 8.4 mm
- **Dimensions (X-Y-Z) | Mini ~ Modern Chess Pieces:** 12.2 x 11-15 x 22-38 mm
- **Dimensions (X-Y-Z) | Mini ~ Classic Chess Pieces:** 12-15 x 11-17 x 21-45 mm
- **Dimensions (X-Y-Z) | Mini ~ Checker Pieces:** 14.1 x 14.1 x 3.5 mm
- **Dimensions (X-Y-Z) | Braille ~ Board:** 200 x 200 x 17 mm
- **Dimensions (X-Y-Z) | Braille ~ Classic Chess Pieces:** 15-18 x 14-21 x 33-61 mm
- **Commercial Use:** Terms and conditions are available on Patreon.

Chess Voyage

Chess Voyage (Standard - Board).stl

**BACKGAMMON VOYAGE**
- Modern take on backgammon that blends aesthetics with functionality
- Smooth folding mechanism ensures quick setup and effortless storage anytime

**Print Instructions & Recommendations**
- It is **highly recommended** to clean the build plate with warm water and soap prior to printing to eliminate the potential adhesion problems.
- **No support** is required.
- STLs for large and mini versions, along with 3MF files with optimized settings, are included in the model files.

**Assembly Instructions**
- Assembly requires **no additional** tools, materials or post-processing. It is a simple print and play model.

**Model Information**
- **Dimensions (X-Y-Z) | Large ~ Board:** 235 x 235 x 17.6 mm
- **Dimensions (X-Y-Z) | Large ~ Pieces:** 18.1 x 18.1 x 4.6 mm
- **Dimensions (X-Y-Z) | Standard ~ Board:** 200 x 200 x 15 mm
- **Dimensions (X-Y-Z) | Standard ~ Pieces:** 15.4 x 15.4 x 3.9 mm
- **Dimensions (X-Y-Z) | Mini ~ Board:** 160 x 160 x 12 mm
- **Dimensions (X-Y-Z) | Mini ~ Pieces:** 12.3 x 12.3 x 3.1 mm
- **Commercial Use:** Terms and conditions are available on Patreon.

Backgammon Voyage

Backgammon Voyage (Standard - Board).stl

Board Games Collection

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

ERAVIA

Achievements

Seedling

Debutant

Board Games Collection

Imperial Chess Set

Chess Voyage

Backgammon Voyage