3D Printed Side Table (Lack Table)
3 downloads · 5 years ago · Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2877688.
This is a 3D
This model is restricted by licensing terms.Â
View license.
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2877688.
This is a 3D printed side table. The top is an epoxy top. Any wood top will work and is held with #8 screws. To make the table wider or taller just print more parts as needed. On my printer the parts did not need glue to hold together. In total there was over 165 hours of printing and about 2kg of filament used. Base measures 19.5" x 19.5" x 21.5" You will need the following parts: 4x Side - Mid 8x Side - End 4x Leg - Foot 4x Leg - Middle 4x Leg - Top
This model is restricted by licensing terms.Â
View license.
Miniature Replica 01. LACK Side Table for Miniature Dollhouse IKEA 3D - IKEA 3D Print (1:12,24,48)
Miniature Replica 02. LACK Console Table for Miniature Dollhouse IKEA 3D - IKEA 3D Print (1:12,24,48
.png&w=3840&q=75)
Miniature Replica 06. LACK Nesting Table for Miniature Dollhouse IKEA 3D - IKEA 3D Print (1:12,24,48
Sovol 3D Dual Filament Dryer - Ikea Lack Table Mount
.png&w=3840&q=75)
Miniature Replica 04. LACK Coffee Table for Miniature Dollhouse IKEA 3D - IKEA 3D Print (1:12,24,48)
.png&w=3840&q=75)
Miniature Replica 05. LACK Coffee Table V2 for Miniature Dollhouse IKEA 3D - IKEA 3D Print (1:12,24,
Filament runout sensor switch & filament guide for IKEA LACK table
BIQU B1 bed AC heater wire strain relief with 90 degree turn for IKEA Lack Table enclosure
Lack Table Paper Towel Holder
(V2) For BIQU B1 - DIY Enclosure - Remix of Prusa's V2 IKEA Lack Enclosure - with extra doors (opening on 3 sides)
Lack Table Holders for Nippers, Pliers and Brushes
(V1) For BIQU B1 - DIY Enclosure - Remix of Prusa's IKEA Lack Enclosure - with extra doors (opening on 3 sides)
.png&w=3840&q=75)
Miniature Replica 03. LACK TV Unit for Miniature Dollhouse IKEA 3D - IKEA 3D Print (1:12,24,48)
Risers for LACK by IKEA - Tall.stl
Miniature Replica 08. LACK Wall Shelf Unit for Miniature Dollhouse IKEA 3D - IKEA 3D Print (1:12,24,
Miniature Replica 09. LACK TV Unit V3 for Miniature Dollhouse IKEA 3D - IKEA 3D Print (1:12,24,48)
Miniature Replica 07. LACK TV Unit V2 for Miniature Dollhouse IKEA 3D - IKEA 3D Print (1:12,24,48)
Ikea Lack Drawers
Risers for LACK by IKEA - Standard.stl
