Phone Stand Print-In-Place (v3)

Latest version of my Phone Stand Cleaner and a little more compact than the last version Feedback for improving is welcome

• Make sure you don't experience stringing and can print decent Overhangs
• Print slowly for the best result
• Print-In-Place

Model should already be orientated correctly for the best result, if not, see the pictures I posted The support for the overhang is included in the model file (no other supports needed)

Has 7 positions with endstops both ways (6 x 20°, 1 for easy storage when folded) Around 0.25-0.35mm tolerance (except the 90° Overhang which should be 0.2-0.28mm depending on your Layerheight)