.png&w=256&q=75)
-2parts-export.png&w=256&q=75)
Phone Stand Print-In-Place (v1.5)
87 downloads · 4 years ago · !!! Make sure you don't experience stringing !!!
!!! Print-In-Place !!!
Normal Version:
https://than
!!! Make sure you don't experience stringing !!! !!! Print-In-Place !!! Normal Version: https://thangs.com/VeYlon/Phone%20Stand-51472?manualModelView=true
UPDATE 2
- Added the Normal Version with a screw-on cap (linked above)
UPDATE 1
- The Overhang where the two parts join might be difficult to remove - I used a Hammer to separate the parts and get them moving
- a Knife/Scapel could also work alltough it might need some force depending on the bridging capabilities of your printer (Thanks to jimmypuurple)
(Around 0.3-0.4mm tolerance except the Overhang mentioned above which is 0.2-0.28 depending on your Layerheight)
Phone Stand Print-In-Place (v1.5)
87 downloads · 4 years ago in
Phone Multi Widget (and Fidget) now include v1.5
Portable Laptop Stand - Print in Place Collapsing Laptop Stand with Cable Coil
.jpeg&w=3840&q=75)
Phone Stand Keychain - Print in Place
STEPH – Screen Top Edge Phone Holder (Print-in-Place)
Print-in-Place Tablet Stand
Compact Print-in-place Reversible Tablet - Phone Stand
NAKAS - Foldable Laptop Stand - Portable Laptop Stand - Print in Place - Collapsing Laptop Stand
Print in Place Phone Stand
Skull Stand - Playstation 5 Disc Edition - Print-in-Place
Print in Place Adjustable Phone Stand
Flexi Labubu (Keychain, Toy, Magnet), Print-in-Parts & Print-in-Place, Fan-Art
Cloud Stand Playstation 5 Disc Edition - Print-in-Place
Print in Place - Pocket - Folding Phone Stand! Portable Phone Stand!
Labubu Clicker + Keychain, Print-in-Place & Print-in-Parts, Clicky Toy
Folded, portable phone stand, print in place.
Foldable Picture Display Stand - Print-in-Place (80mm and 160mm)
Angel vs Devil Labubu – Toy, Keychain & Magnet! Print-in-Place & Print-in-Parts
Print-in-Place Netbook&Tablet Stand
Print in place phone stand
This is a great design but the lip at the bottom comes up too high so when my phone is sitting in the holder I'm unable to swipe up to exit an application. I modified the STL using Shapr3d and printed a version that doesn't cover the bottom of my iPhone's display.
I have printed it right from the description and it came out great! I didnt seperate it with a hammer but with a knife and some stretching.
Also a good Idea 👍
If anyone doesn't want to print the Print-In-Place Version, here is the normal one with a screw-on cap: https://thangs.com/VeYlon/Phone%20Stand-51472?manualModelView=true Each and every Community Print uploaded helps me define the problems with the Stand.
Best phone stand!
Thanks so much for your feedback! I'm glad you are enjoying it.
For any Questions and ideas, for whatever you might need just ask/tell me here. I will gladly respond.