Phone Stand (v1)

Phone Stand without Print-In-Place !!! Make sure you don't experience stringing !!! Print-In-Place Version: https://thangs.com/VeYlon/Phone%20Stand%20Print-In-Place-51206?manualModelView=true

(Around 0.3-0.4mm tolerance)

Settings: 0.24mm Layerheight 0.4 or 0.6mm Line Width (My Printer is calibrated to do 0.45mm with a 0.4mm Nozzle but printed it with 0.65mm Line Width on a 0.4mm Nozzle) Atleast 2 Walls (with 0.6mm Nozzle, 3 with 0.4mm Nozzle) 1mm Minimal Travel of Rectraction