This 3D printed chess game is graphically inspired by 2 of the worlds well known religions, Christianity and Judaism.  This is a multi piece model that requires assembly for board/box. Items needed for assembly are a paperclip or similar sized hinge rods, wire cutters if using paper clips, superglue for tiles, hinges and latch. 2 clamps recommended to align box securely while mounting hinges. Details for printing and assembly below.
PLA used in these recommendations. settings can change depending on printer,filament, temp, slicer, etc.
50%+ infill on chess board with .3 layer. Zigzag infill.
.2 layer for all else.
100% infill on latch and hinge parts.
Supports needed for white king.
My print speed is 60 leading to this average print time of 50 hours total. an hour per game piece, 8 hours per board and an hour for latch and hinges. Assembly instructions below.
Assembly
Print a BOARD half and a pawn. Check pawn to box clamp for secure fit. Can adjust slicer settings to get a tighter/looser fit or file inside of game pieces to fit.
Print Pieces when satisfied.
Print 2nd box and remaining parts.
Clean HINGES, cut paper clips or use hinge rods to assemble hinges to each other. Can melt ends of hinge after to secure rods from sliding out through excessive use. 
Box has a fine outline cutout of hinge to apply hinges accurately. If they do not lay smooth, lightly file off the tapered edge. Secure box using clamps. Once properly aligned, glue hinges on, careful not to run glue into box seam.
Use a tiny dab of glue on the larger end of each LATCH nob and assemble through box knob holes. Place latch on exterior of one of the box knobs before assembling. Test latch assembly for clean fit before applying glue.
Tiles print in sets of 8. Need 4 sets of each color. Tiles glue onto board and will align to edge of board and to edge of each other, no space. Test going the direction of 4 without glue to ensure print setting are accurate. Because of smooth surface, very little glue needed but ensure edges lay smooth around board rim. Can avoid using 32 tiles if board is same color and achieved a clean board print but applying the tiles is more difficult and creates a slight up and down texture between tiles.






Judeo-Christian Chess Board Game

Chess_White_King.stl

This package includes an 11-inch ruler and a shaping tool with rivet hole placements, perfect for your precise measurements. This amazing set offers curved bends for 1/4, 1/2, 3/4, and 1-inch rounded corners, as well as 90-degree angles at 1/2, 3/4, 1, and 1 1/2 inch.This all in one tool increases workflow and convenience. These 3D models are perfect for abusive use with our recommendation of a 100% infill. Fortunately, no supports are needed for these highly functional tools. 
Personal model market price $10 for set.

Sheet Metal Ruler and Corner Notch and Radius Marker Tools

Sheet_Metal_Tool.stl

Get more spice in your life with our unique 3D model of a Salt and Pepper shaker designed after Blues Clues characters These whimsical shakers come with screw-on caps and additional parts that need to be glued in for the completion of the model.

The animated characters-inspired design adds a touch of fun to any kitchen or dining table. 

To ensure the durability and strength of these shakers, especially if you're planning to use them to hold food products such as salt and pepper, we recommend using supports for the caps during the printing process, and 100% infill. 


Salt And Pepper Shaker

SaltPepper_Top.stl

Immerse in a fun gaming experience with our accurately created 3D model replacements of the hammer and ice block for the popular board game, "Don't break the ice", brought to you with precision by Digital North 3D. These 3D models can be easily printed for immediate use. Perfect for board game enthusiasts and 3D printing hobbyists who love both old-school entertainment and cutting-edge technology. Replace your missing or worn-out pieces, and let the game continue!
Hammer prints in 2 parts and must be glued together.



Dont break the ice hammer and ice cube

IceBlockHammer.fbx

This pack includes the letter numbers and symbols on the common keyboard in a couple formats. They are great for wall decor, magnets or stencils.  Default size pack has every letter, number and symbol (3" tall) separated for a quick easy print of what you need.  They also include an indented holed for nails or tacks. A perfect fit for a panel nail or similar 1/16th gauge hole with a 1/4" head. These default size models with hole can be easily resized to the limit of your printer. Example letters on plywood display image. Great for the classic Alphabet on the wall look. They are also a great way to burn through all of your sample pack filaments that often come with rolls.

The other set are smaller and do not include the holes. They are perfect for sensory hands on learning, They are packed in groups for quick easy printing to include a couple common letter multi print files. These letters, numbers and symbols measure out at 1" 1/2. Display image of scattered letters on table represent these. FBX and STL files included in packs.
Personal model market price $20 for Default size pack, $10 for small packs.

Keyboard Alphabet Numbers & Symbols

All_Keys_Converted_W_HolePunch.fbx

Experience elevated automotive fashion with our cutting-edge 3D model of an Oil Filter Case, exclusively designed for small block Chevy oil filters (up to 1997 models) minus LS edition. This uniquely styled fashion accessory is a must-have for all automotive enthusiasts. Developed with a thick base for optimum protection against rock damage in dirt track racing, it adds an aesthetic appeal under the hood with four design versions. This versatile model can be effortlessly resized to fit nearly any oil filter to suit your specific requirements. 

For your convenience, sizing ring files are included for test prints if resizing is needed. The current model has an inside diameter of 3" and 11/16th. A Wix racing oil filter 51060R fits so smoothly that a vacuum hole is installed at the bottom to keep filter from being stuck inside case but again, can be easily resized to fit most filters.

No supports are needed.
 A .2 layer height is ideal for best results. Models showcased in the images are crafted in PLA. 

Personal model market price $20 ea.

Oil Filter Case

Oil_Filter_CoverV1.stl

This pack includes 10 toppers and 3 clamps that will fit the most common controllers. Screw in feature gives a snug but easy to swap ability in colors and design. Give your fingers some adventure with the various toppers from a mini joystick to spikes in the thumb. Live a little. Ensure printed area of the screw attachment is clear of any dirty printing. Important to attach desired clamp to topper then apply to controller. Topper acts as a top seal for clamp. Recommend .8 layer with %100 infil. Recommended pricing for printed models, $5 a pack.

Controller Toppers Playstation Switch Xbox 3D print model

Controller_Topper_Rings.stl

This 3D printable model is designed to snugly fit the Nitro Rugged Bee, featuring specific openings for charging, the power light, and top plug-ins - meaning it never needs to be removed from its case.  For mounting, it's versatile, it can be attached using rivets, screws, or simply by replacing the Nitro's own clip to the case.

The model file comes in FBX format, which makes it easy for hobbyists to personalize. Imagine having '68T' or your own preferred image stamped! We recommend a .2 layer with a 50% infill for a lightweight yet sturdy print, no supports needed - a perfect do-it-yourself project! 

Recommended pricing for printed model, $20ea. Contact for custom design pricing.


Nitro Bee Rugged Mount Case

Reciever_Case_Default.stl

Experience the magic of Christmas with Baby Yoda! This Baby Yoda Hovering Pram Christmas ornament belongs to the Miniatures category at thangs.com and is designed by Digital North 3D. Look forward to a joyful Christmas with this 3D printed ornament featuring the popular Baby Yoda, snugly seated in his hovering pram. 

This Christmas ornament can be printed at various sizes to suit your preferences. However, it's recommended to use lower infill at a larger scale to reduce its weight. Please note, printing a smaller model than the default file will not include the pram's shielding arms. The model stands out beautifully when it's painted, adding to its life-like representation and subsequently enhancing its sales value.

The 3D model necessitates supports for a perfect print. It specifically recommends tree supports for a flawless result. This personal model is ideal for those wanting to add a fun, fandom touch to their festive decorations.

Pricing for this model starts from $3, extending to $10 for painted versions. These rates represent personal market value.

Baby Yoda Hovering Pram Christmas Ornament

Yoda_Crib_Orn.stl

Discover a unique 3D model of a Jack O' Lantern made by Digital North 3D, perfect for enhancing your upcoming Halloween decorations. This model, featured on thangs.com, can be easily resized to match your specific needs. One of the defining features of this 3D model is its removable top, designed with a notch for simple alignment when replacing. It's specially crafted to hold light sources, illuminating your space and offering an authentic Halloween atmosphere. Low infill prints can reveal interesting patterns, providing you the chance to customize your prints with the various infill options your printer may offer. If you prefer, high infills can be used to keep the light contained within the Jack O' Lantern. This 3D model requires supports. Make your Halloween celebrations memorable with this amazing, ready-to-print Jack O' Lantern model. 
Personal model market price $3ea. $10 painted.

Jack o lantern pumpkin StitchMouth

Pumpkin_StitchMouth.stl

Discover the Sun Ashtray, a unique and artistic 3D model available on Thangs.com. This distinctive ashtray design, crafted to resemble a radiant sun, brings a touch of summer warmth to any setting. The Sun Ashtray can be easily resized to suit your desired resting location, providing great flexibility in its functionality. 

This 3D model ensures long-lasting use even with cigar-sized burning embers if using four or more top layers in print. While it could double as a throwing weapon, this use is not recommended, asserting its primary function as an ashtray. To increase user convenience, there is no need for supports in the printing process. 

The Sun Ashtray's default print size is 7 inches in diameter, a perfect size to accommodate multiple smokers and present a bold, artful statement on any table. With its artistic appeal and practical utility, this 3D model is more than just an ashtray - it's a stylish addition to any smokers' collection. Enjoy the blend of art and practicality this model brings to your space. Embark on your 3D printing journey with the Sun Ashtray from Thangs.com, where creativity meets functionality.
Personal model market price $3ea. $10 painted.

Sun Ashtray

Sun_Ashtray.stl

A common Medusa style replacement Shade. Printing with various infill styles and wall layers can create different lighting effects. Can be resized to fit other models. An fbx is included to resize mounting hole or add details to shade if desired. Default size is 5,1/2" ht. 6"dia with a mounting hole of 1,1/4" dia.

LampShadeReplacement.fbx

LampShadeReplacement.stl

Explore the world of 3D art creations with this unique and intricately designed Axe & Hammer Book Ends model at thangs.com, artistically brought to life by 'Digital North 3D' for avid collectors in the "Art/Sculptures & Statues" category. Drawing inspiration from the powerful God of thunder, these bookends add an exciting touch to your bookshelf, alternate as practical mail holders, or dazzle as stand-alone art pieces. 

Crafted meticulously, the 3D model has been designed with a default print size, perfect for holding up your books with a suggested 50% infill to provide an adequate weight balance. Recommend easy-to-apply stick and peel friction pads for a sturdy grip, preventing any slips and slides. You can resize the model effortlessly to fit your specific needs. **One should note that support structures are required when 3D printing the axe en**d.
Images of Painted model are of the prior version. Current version has Axe itself rotated to minimize supports needed, as represented in all other images. Hammer has also been tilted and sits lower in rock.

Pricing for this model starts from $5 for the basic model with pads, extending to $15 for painted versions. These rates represent personal market value. Elevate your collection with this impressive Axe & Hammer Book Ends 3D Model from thangs.com. Let the bold and creative design add a new flavor to your décor and behold the power of the God of thunder right in your room!

Thunder God Axe & Hammer Book End

AxeHammerBookEnds.fbx

The medieval studded club mace keychain is is great for cracking skulls... No its not but it does look nice hanging from the keychain. Easy model for printing and painting. The split down the middle was originally designed to eliminate the need for supports but proved to have an added benefit of structural integrity making it more durable and stable. Assembly requires about 3 dabs of superglue and one key ring.
Recommended Model Market Value $1ea w key ring included

Studded Mace Keychain

MaceKeychain.stl

Discover the uniquely versatile 3D model from Digital North 3D. This Lava Lamp can be used interchangeably to hold cards, balloons, pictures, and more, enhancing the utility manifold. The package consists of two main files: STL and FBX but does not require any supports. Assembly requires additional materials such as cable wire, alligator clip, and super glue. The perfect demonstration of minimalistic design, the model exhibits classic aesthetics and functionality rolled into one. Be sure to check out multiple views of the model, with visuals showcasing the roach clip from various angles for a more comprehensive appreciation. 
Recommended Model Market Value $3ea., 2 for $5

Lava Lamp Clip

LavaLampClip.stl

Explore our Superman clip 3D model on Thangs.com, a fascinating piece in the "Costumes & Cosplay/All" category designed by Digital North 3D. Tailor-made for holding items such as cards, balloons, or even marijuana joints, this multifunctional clip offers a unique blend of practicality and fun. The package includes .stl and .fbx files.  No supports are required, providing an effortless printing experience. Please note, cable wire, an alligator clip, and Super glue are required to assemble the model.  Don't hesitate to add this impressive Superman clip 3D model to your collection today!
Recommended Model Market Value $3ea., 2 for $5

Superman Clip

SupermanClip.stl

Discover the uniquely versatile 3D model from Digital North 3D, available on Thangs.com. This alluring model falls under the 'Fashion' category and encapsulates a modernistic approach to common items. Designed to perfection, this easy-to-grip clip can be used interchangeably to hold cards, balloons, pictures, and more, enhancing the utility manifold. The package consists of two main files: STL and FBX but does not require any supports. Assembly requires additional materials such as cable wire, alligator clip, and super glue. The perfect demonstration of minimalistic design, the model exhibits classic aesthetics and functionality rolled into one. Be sure to check out multiple views of the model, with visuals showcasing the roach clip from various angles for a more comprehensive appreciation. Experience the fine detailing and the artistic prowess that this 3D model brings to the desk. Explore more such creative designs at Thangs.com.
Recommended Model Market Value $3ea., 2 for $5

Easy Grip Clip

EasyGripRoachClipWithLeaf.stl

Explore the intricate detailing on this 3D model of a wooden basket available for cosplayers and costume designers on thangs.com. This versatile model designed by Digital North 3D can be printed at various sizes to suit different needs - whether you need a prop to hold water or miniature weapons during your role-playing sessions. 

What’s more? Its design is easily customizable. You can modify the .fbx file included in the purchase to add handles for carrying convenience or water slots, transforming the basket into a creative planter. 

The wooden basket model includes .fbx and .stl files, all of which have been meticulously crafted using Blender. It uses about 260g of material on average. With its default printing size set at 165X165X155mm, it can be conveniently resized to suit your personal or commercial project requirements, further enhancing its adaptability. 

To achieve optimal results, we recommend printing the .stl file at a 0.2mm resolution and 10% infill without supports. Visit thangs.com to discover more unique and adaptable 3D models under the 'Costumes & Cosplay/Props' category!

MaceBasket.fbx

Explore our unique 3D model of a Wonder Woman Clip on Thangs.com. Designed by Digital North 3D, this versatile clip can be used to hold cards, balloons, and even marijuana joints. As part of our Fashion/Accessories category, it promises a blend of style and functionality that fans of the iconic superheroine will definitely appreciate. 


Fancy printing your own Wonder Woman clip? Our 3D model is convenient to print, requiring no supports. In order to assemble, you'll need additional materials like Cable Wire, an alligator clip, and Super glue. 

From fashion to functionality, our Wonder Woman 3D model offers endless possibilities. Transform your ideas into reality now with this versatile and practical 3D model, only on Thangs.com.
Recommended Model Market Value $3ea., 2 for $5

Wonder Woman Clip

WonderWomanClip3pc.stl



The medieval studded club keychain is is great for cracking skulls... No its not but it does look nice hanging from the keychain. Easy model for printing and painting. The split down the middle was originally designed to eliminate the need for supports but proved to have an added benefit of structural integrity making it more durable and stable. Textured image is not included. Displayed for paint reference.
Assembly requires about 3 dabs of superglue and one key ring.
3D printing settings

-No modification needed, import and print.
-Created in Blender. File includes .fbx, .STL,
-.FBX included for easy manipulation
-Default print size: 110X33X8mm
-.2mm layer height
-30%infill
-21 minute print
-6 grams of material
-No Supports needed
Personal printed market value with key ring included is $1


Studded Club

Studded Club.stl

Introducing the charmingly festive 3D model Snowman Christmas Ornament from the Digital North 3D collection on Thangs.com, under the 'Pop Culture/Characters' category. Perfect for the holiday season, this pop-culture-inspired ornament integrates intricate details like arms, a pipe, and buttons that can be neatly stored in a present box for safe packing. The original design includes two hats, with the one that doesn’t feature a hole intended for table-top display. To enhance its versatility, the hat needs to be glued or securely attached to the base after assembly so you can hang it if you wish. Ideal for 3D print enthusiasts, this model has successfully printed at .2 with no supports using FDM technology. This unique and eye-catching 3D model takes Christmas decor to a whole new level. Discover the Snowman Christmas Ornament by Digital North 3D on Thangs.com today. 
Recommended Model Market Value $3

Snowman Christmas Ornament

SnowmanXmasOrnAllParts.stl

Showcase your unique style with the 3D model Punisher Clip exclusively available on Thangs.com. Hand-crafted by the talented designer Digital North 3D, this multipurpose clip is perfect for cardholding, ballooning, and even handling marijuana joints. The stylish Punisher Clip comes in .stl and .fbx formats, making it perfect for 3D printing for 3D printing. The ingenious design requires no supports, ensuring a smooth printing process. For assembly, all you need is cable wire, an alligator clip, and a dollop of super glue. Follow the original link on Thangs.com to gain access to this 3D digital model. Transform everyday objects into fashionable accessories with this 3D printed Punisher Clip design. For a visual preview, be sure to check out the stunning images on our site. Don't miss out on the chance to take your fashion accessory game to a whole new level with the innovative and stylish 3D printed Punisher Clip.
Recommended print 
Recommended Model Market Value $3ea., 2 for $5

Punisher Clip

PunisherClip2pc.stl

Explore the intricately designed Blood Ruby Short Sword 3D model on thangs.com, skillfully created by designer Digital North 3D in the Miniatures/Fantasy category. This original design short sword complements its Boar shield counterpart uniquely and offers versatility, transforming into a key chain at its default print size or printed as a miniature. For added strength and durability, the model is crafted in two halves, aligning the print layers along the length of the sword for a more robust build. The product ensures a simple print and does not require supports, providing an easy and efficient 3D printing experience for all skill levels. Visitors searching for top-notch fantasy miniature 3D models will find this Blood Ruby Short Sword a combination of craft, creativity, and functionality. The intricate detailing visible in the provided visuals asserts the model's appeal, showcasing the expertise and dedication to quality 3D design.


Blood Ruby Short Sword

ShortSwordKeyChain.stl

Step into the world of 3D modeling with this intricately designed Medieval Square Boar Shield, available at Thangs.com. Perfectly catering to the 'Costumes and Cosplay/Props' category, this shield personifies medieval authenticity with an added touch of fantasy. The shield, previously used in game development, serves admirably as a desk prop, painting project or a miniature cosplay prop. It is also humorously recommended as a mini-guard for babies, although its protection is not promised to be foolproof. The download conveniently provides both a .stl file for immediate 3D printing and a .fbx file for model manipulation, making it user-friendly for both novices and experts. While this 3D model doesn't include textures, the textured image provided offers an inspiring example of how amazing it could look when painted. Dive into your creative journey with this Medieval Square Boar Shield - the perfect blend of history and imagination.

BoarShield.stl

Discover an innovative and fun Batman clip 3D model available on Thangs.com under the category of Hobbies/Electronics & Gadgets. This creatively designed model can be used for holding items such as cards, balloons, and marijuana joints, showcasing its versatility. The model is provided in various formats including .stl and .fbx for your individual usage needs. In addition to being an interesting item for hobbyists, this Batman clip also promises easy assembly, requiring additional material of cable wire, an alligator clip, and super glue. Relish the alluring visuals of the 3D model using the given images. The model exhibits great features for 3D printing, not needing any additional supports. Unleash your creativity with this unique, dynamic Batman clip 3D model, and set your imagination free. Remember to visit the designer's page, Digital North 3D, for more interesting 3D models. Lean into your hobby or broaden your collection of electronics and gadgets with this outstanding Batman clip 3D model! Grab it now on Thangs.com.
Recommended Model Market Value $3ea., 2 for $5

BatmanClip.fbx

BatmanClipRingPart.fbx

The Flash clip that can be used to hold cards, balloons, marijuana joints etc.
.stl and .fbx in zip
3D printing settings

No supports needed.
Additional material needed to assemble:
Cable Wire, alligator clip, Super glue
Recommended Model Market Value $3ea., 2 for $5


Flash Clip

FlashDiskLightning3pc.stl

Prior video game designer, now modeler and printer from the garage.  Models are crafted in blender, played with in Unity and printed from a Qidi Pro X Plus. Contact for custom models or parts with the blueprints, ie. measurements at minimum, example parts, images, good descriptions help

Digital North 3D Models

Prior video game designer, now modeler and printer from the garage.  Models are crafted in blender, played with in Unity and printed from a Qidi Pro X Plus. 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Digital North 3D

Achievements

Sequoia