Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5398073.

This is a bicycle cargo or bidon mount adapter for if you need more mounting points.
You can insert standard M5 nuts into the adapter and mount it to the bike with M5 bolts through the slides or with T-Raps.

I do recommend gluing the nuts in place, but it is not necessary if you directly mount something on it. 

If you have a carbon frame or fork, put something soft inbetween this and the carbon part.

I can recommend printing it with the nut insertion side towards the printing surface, as that would make using supports unnecessary 

Bicycle bidon or cargo mount adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6035997.

This is a front speaker adapter which you can use to mount 17 cm speakers.
The holes for the speaker itself are 4 mm and are spaced 158 mm in diameter.

I will try to create one for the rear speakers as well, and maybe add a lifter variant

Fiat Grande Punto 199 Front 17 cm Speaker adapter ring

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4458336.

Hey guys, I was messing around with photogrammetery and ended up with an alrightish version of me in 3D.

The model seems to be on its side, so give that a look when you want to 3D print me

Its me, but digital now!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4459838.

Do you also have a screen which has that annoying stand?
Do you also want to have a simplistic stand for your screen?
Then this might be the solution for you!

I made this because I was using an old screen with a vesa mount to be portable and I wanted to be able to take it with me and place it down on a table without having to lug that entire screen stand with me.


Vesa Mount Simple Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4947747.

This is an Airtag holder with holes for T-Wraps for general mounting in places like in your bike saddle.

The object is symmetric, so print 2 for a complete enclosure

Airtag Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4887255.

This design transforms the normally 4 person game of KEEZ BORD into a three person game.
It should fit the game perfectly, as I tried it out with the plastic variant of the game.
If you thing it might not fit your style of board, print the non completed loop, as that is bendable and can thus be adjusted untill it fits

KEEZ board game extension for 3 persons

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4389987.

This is a print for a tablefan, its made for 120mm fans, with an additional file where you can mount your own design! 
The holes are 5mm wide and are spaced an even 102 mm (from hole center to hole center) so that you can make your own design to put onto it!

It is still a WIP for me, as I have not yet been able to print it due to my many other printable projects, but dimensionwise it should be able to work as I have used previously used dimensions for another project using a spare 120mm PC fan

Make your spare PC fan into an table placed fan!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4865044.

Small cable holder, still work in progress, but should work fine

The passthrough holes are 10 mm in diameter, and the screw holes are designed for M3,5 metric screws


Cable holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4865048.

A small 19 mm open socket wrench, I designed it to use with my Tenlog Hands 2 for calibrating the second extruder.



19mm open socket wrench

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5381458.

This is a hinge replacement for the IKEA Stall shoe closet

IKEA Stall shoe closet hinge

IKEA stall shoe closet hinge

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

DesignedByPepijn

Achievements

Seedling