Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5216522.

Watch this video for full install and details: https://youtu.be/ymzXKkLXK9s

This great circular saw has only one weakness: no dust collection port. Today we fix that.

Prints with no supports needed. If you print with 0.3 layer height and 0.6 wall width, you can get a solid part with 2 outer walls right up against 2 inner walls, giving you a 2.4 thick plastic part that prints the quickest and is the strongest. By the way, in those settings, assuming you are printing with a 0.4 diameter nozzle, you would have it emulating a 0.6 nozzle.

Hardware / non-printed materials:

• Three (3) Screws, M4 x 8mm, and matching M4 nuts • CA glue • Loctite 243 Blue Medium Strength Threadlocker

3D-printed items • In addition to the two STL files in this 'thing' — in the video I also mentioned my other reducer for my Ryobi Table Saw. Here's that link: https://www.thingiverse.com/thing:5215852

Variable torque tool used in video BLACK+DECKER Electric Drill, 3/8-Inch, 4-Amp (BDEDMT)

IMPORTANT: Use at your own risk! Take all precautions and use proper protections. Any use of this modification by you indicates you agree to indemnify and hold harmless Douglas Joseph and Design8Studio in every way imaginable.

Consider saying thanks If you like/use my files and do this modification to your own saw, please consider buying me a cookie via this link: https://paypal.me/dougjoseph

Note All links are affiliate URLs when and where possible.