Just a straight forward Spongebob keychain.

5x5cm

If you have any suggestions, just message DertiDan#7777 on Discord.

SpongeBob Keychain

Longboard Wall Mount!

Pretty straight foward. You need 2 for each end. Place through the truck holes and screw it in your wall. 

Big hole -> Screw with a drywall anchor.

Small hole -> Just a normal screw directly in the dry wall for stabilisation.

If you have any suggestions, message DertiDan#7777 on discord.

Longboard Wall Mount

SUNLU filament holder to replace the stock filament spool holder on the CR-10 V3.

To know if your printer is compatible with my design, check if your spool holder screws are 2cm appart or moveable.

BIG PART (length - 27 ish centimeters)

CR-10 SUNLU Dryer Holder / Mount

SUNLU filament holder to replace the stock filament spool holder on the CR-10 V3.

To know if your printer is compatible with my design, check if your spool holder screws are 2cm appart.

BIG PART (length - 27 ish centimeters)

SUNLU Filament Heater Holder

A more expensive benchy for the ones who need a little more class.

Message me on discord if you have any suggestions! DertiDan#7777

Luxury Benchy

Monster energy keychain!

Message me on discord if you have any suggestions! DertiDan#7777

Monster Energy Keychain

Monster energy badge!

You can print it in your desired color and sharpie black the trim.

Message me on discord if you have any suggestions! DertiDan#7777

Monster Energy Badge

Well it looks like a ping pong paddle so it must be one.

Message me on discord if you have any suggestions! DertiDan#7777

Ping Pong Paddle

Well it looks like a ping pong paddle so it must be one.

Materi

Snazzy little weed jar for your buds.

Similar to the one on thingiverse, how ever the one on thingiverse has alignment issues between the jar and the lid.

Diameter: 70mm
Total height: 58.75mm

Message me on discord if you have any suggestions! DertiDan#7777

Enjoy!



Weed Jar

Snazzy little weed jar for your buds.

Diameter: 70mm
Total height: 58.75mm

Enjoy!



WeedJarLid.STL

AirTag Case to be printed with TPU.

Personally, I dabbed a little bit of gorilla glue on the back of my AirTag before putting it in just for peace of mind, but not required.

DertiDan#7777 for suggestions!

AirTag Case

AirTagCase.STL

A front view of the portal gun in "Portal" to put on top of the creality filament sensor shown in the pictures.

IMPORTANT -> SCALE IT 200% IN SLICER!

DertiDan#7777 for suggestions!

Portal Gun Cover For Filament Sensor

A front view of the portal gun in "Portal" to put on top of the creality filament sensor shown in the pictures.

IMPORTANT -> SCALE IT 200% IN SLICER!

A beautiful 3D model of the legendary 2000lbs Mark 84 General Purpose Bomb.

Weight and height are crossed off as you should scale it to your liking.

DertiDan#7777 for suggestions!

Mark 84 General Purpose Bomb

A beautiful 3D model of the legendary 2000lbs Mark 84 General Purpose Bomb.

Weight and height are crossed off as you should scale it to your liking.

Cool little NUKE. You can make a Keychain out of it or just use it as a figurine.

Print with supports, but put support blockers on the radioactive logo.

DertiDan#7777 for suggestions!

Nuke Bomb

Cool little NUKE. You can make a Keychain out of it or just use it as a figurine.

Hi, I'm an engineering student with access to professional 3D designing programs like solidworks and Catia (Solidworks being my favorite of course).

If you have any suggestions, feel free to inbox me on discord (DertiDan#7777)
I'm capable of very complex designs and love a challenge.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

DertiDan 3D Designs

Achievements

Seedling

Up and Coming