HueForge - Dragon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA PolyLite Beige Transmission Distance: 1.5 PLA+ Sunlu White Transmission Distance: 5

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Grey At layer #12 (1.04mm) swap to Silver At layer #16 (1.36mm) swap to Beige At layer #17 (1.44mm) swap to White for the rest.