HueForge - Dragon #2

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Gray At layer #12 (1.04mm) swap to Silver At layer #16 (1.36mm) swap to White for the rest.