Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5
Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Grey At layer #8 (0.72mm) swap to Silver At layer #13 (1.12mm) swap to White for the rest.
Categories:
3 Likes12 DownloadsFebruary 1, 2024
3 Likes12 DownloadsFebruary 1, 2024