We love woodpeckers! This Pileated Woodpecker HueForge makes a great decoration in your home or as a gift to any nature lover you know.
HueForge Settings
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 5 PLA PolyLite Pink Transmission Distance: 3 PLA PolyLite Aqua Blue Transmission Distance: 3.6 PLA PolyLite Pro Cold White Transmission Distance: 0.5 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #10 (0.88mm) swap to Pink At layer #12 (1.04mm) swap to Aqua Blue At layer #18 (1.52mm) swap to Cold White for the rest.