Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4704634.

_After hours of exploring every nook and cranny of Tallon IV, finding every one of the 12 artifacts, and defeating your nemesis (definitely for sure this time no doubt), you venture into the core of the Impact Crater to face off against one last foe..._

https://www.youtube.com/watch?v=Di036VIv2HY

This is Metroid Prime, the final boss of... Metroid Prime. This articulated figure was made using the actual in-game model of the creature (with the help of MPR and URDE), with brand new joints added to every articulation. Most of the pieces are just as they were in-game, with some modifications done here and there.

The inside of the boss is hollowed to allow the addition of an RGB LED module inside, which represents the beam vulnerabity of the creature, this is also why some of the parts are made with translucent material, first to allow the light of the LED to escape, but also to be able to use the remote control that comes included and needs line of sight with the IR sensor.

The space inside was designed to house the electronics and the transformer of a particular 3W lamp I bought and gutted, if you are interested, just know that the size of the PCB is 32x32mm (Ø36). The back leg has its three segments also hollowed out to allow the passage of a cable to power the LED, but if you don't want to do that stuff, I've also provided a version of the toe (?) without the hole.

To assemble this beast, you will need two of each part with the exception of the jaw and the lower teeth which only one of each is required, and the piece called peg_1 needs 10 of each to make the hinges, I tried having them being part of the limb but they kept breaking, forcing me to discard the whole part, so I decided to have them be their own thing, which allowed me to print them in a better orientation. The smaller pegs are for an easier assembly of the halves, you will need roughly 14 of them.

Every single part is from the left side and to make the right side all you need to do is duplicate and mirror the parts. Limbs with the number 1 are closest to the body, number 2 is the middle part, and number 3 is the extreme. "Joint" pieces are attached to their corresponding body part, and "connection" pieces link the joints to the limbs. The very last upper tooth actually prevents the mouth from being able to close itself properly, so I added an alternate version that has that last tooth removed, guess too much Phazon ingestion can cause cavities.

I'll probably add an infograph because it can be confusing, and assembling the body can be quite tough without help. Vises and rubber bands will come in handy while gluing some of the parts together.

Your feedback is more than welcomed, as Im still looking into some of the parts.

EDIT1:
Added the eyeball for the 6 body eyes.

Changes to the front leg parts:
+New shorter Peg3
+New Connection and Joint pieces now using ball joints
-Removed the older versions to avoid mixups.

EDIT2:
+Finally added the infograph.
+Changed the eyeballs.

_See you next mission._

Metroid Prime

back_leg_2.STL

back_leg_3.STL

back_leg_3_solid.STL

body_front_transparency.STL

body_shoulder.STL

body_side_fang.STL

body_v2.STL

eye_1_transparent.STL

eye_2_transparent.STL

eye_3_transparent.STL

eyeball_1.STL

eyeball_2.STL

front_leg_1_v2.STL

front_leg_2.STL

front_leg_3.STL

front_leg_connection_V2.STL

front_leg_joint_transparent_V2.STL

head_bottom.STL

head_face_transparent.STL

head_middle_transparent.STL

head_top.STL

mouth_jaw.STL

mouth_lower_teeth.STL

mouth_upper_teeth.STL

mouth_upper_teeth_alternative.STL

peg.STL

peg1_x10.STL

peg2_x2.STL

peg3_V2_x2.STL

shoulder_connection.STL

shoulder_joint_transparent.STL

shoulder_stinger_1.STL

shoulder_stinger_2.STL

shoulder_stinger_tip_transparent.STL

sideleg1.STL

sideleg2.STL

sideleg3.STL

sideleg_connection_transparent.STL

sideleg_joint_transparent.STL

sideleg_lid_transparent.STL

Update 1: Added a looser variant of the peg_2, hopefully this one will make it easier to assemble the figure.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5428744.

New articulated figure, this time its Ornstein from Dark Souls!

This figure uses the actual game model, downloaded from The Models Resources, most of the geometry is preserved with minor modifications. The only thing I didn't do was the chainmail cloth so to not limit his mobility.

To simplify the assembly as much as possible, there are only two main type of pegs used all throughout, with only a few specialized ones for some joints. Pegs and joints should be printed flat on the bed for better strength whenever possible, and I have tappered most of the pieces to give them some kind of flat surface for this. Pegs can be squished with pliers for easier plugging, causing some small deformation to them should not be a problem.

To piece together the figure, you will have to read the item description included in every stl file... nah jk, I'll soon include an infograph with instructions, altough it is fairly straightforward. All pieces are of the left side of the figure, and you will have to duplicate and mirror them in your slicer of choice. I will also provide some files with multiple pieces. For the most part, glue is not necessary and the pegs should be strong enough to hold everything together.

Everything fits a standard 200x200 bed, however the stand pole is too tall and I split it in two pieces, this one could be glued together, but I also have a single-piece version of it if you have a bigger bed.

Each piece is labeled with the recommended filament color in their file name, if no color is indicated, use whatever you want as the piece will not be visible. Most of the figure was made in gold and black.

This fella is 18" tall, with the lance going up to 23". Total printing time was around 150hs not counting prototyping and testing.

Update 1: Ive added an articulated stand for better posability.

Dragon Slayer Ornstein articulated figure

ankle_black.STL

arm_1_black.STL

arm_1_guard_gold.STL

back_skirt_dark_gray.STL

base.STL

collar_gold.STL

couter_gold.STL

elbow_1_black.STL

elbow_2_black.STL

fauld_1_gold.STL

fauld_2_gold.STL

fauld_3_gold.STL

fauld_4_gold.STL

fauld_5_gold.STL

fauld_6_gold.STL

fauld_joint_gold.STL

femur.STL

fingers_curled_gold.STL

fingers_straight_gold.STL

foot_gold.STL

forearm_gold.STL

gauntlet_articulated_gold.STL

gauntlet_curved_gold.STL

gauntlet_gold.STL

hair_peg.STL

hair_silver.STL

head_back_gold.STL

head_face_gold.STL

hip_black.STL

knee_1_black.STL

knee_2_black.STL

knee_3_black.STL

knee_guard_gold.STL

lance_base_gold.STL

lance_pike_silver.STL

lance_shaft_gold.STL

lance_stock_black.STL

leg_1_armor_gold.STL

leg_1_black.STL

leg_2_gold.STL

neck.STL

pauldron_connection_gold.STL

pauldron_gold.STL

peg_1_black.STL

peg_2.STL

peg_torso.STL

peg_waist.STL

shoulder_black.STL

shoulder_joint_black.STL

stand.STL

stand_half1.STL

stand_half2.STL

thigh_black.STL

toes_gold.STL

waist_black.STL

wrist_gold.STL

stand_articulated_1.STL

stand_articulated_2.STL

stand_articulated_3.STL

peg_2_looser.STL

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5934452.

This is a 1:2 articulated figure of Samus' Varia Suit from Metroid Prime 3: Corruption.

Im using this page as a "low poly" backup, with the other page containing the high quality models. Most of these can be printed in a 200x200 bed, but the legs will need a larger space.

Instructions for assembly are included in a PDF file. Grouped files for different parts will come at a time. All pieces should be printed in gold colored filament unless specified otherwise in the name of the file or the instructions.

This is still a work in progress and pieces might be replaced with new improved versions after testing.

Assembly requires two ¼"x3" screws for the hips and a handful of 3/16" screws (can be M5 as well) of different lenghts for everything else, these are as follows:

Six - 3/16" x1" - 5mm x25mm (ankle and arms)
Two - 3/16" x1 1/2" - 5mm x40mm (elbow)
Two 3/16" x3" - 5mm x75mm (shoulder)
Two 1/4" x3" - 6mm x75mm (hip)
Four 3/16" x2 1/2" - 5mm x65mm (legs)
Five 3/16" x2" - 5mm x50mm (leg2, knees and torso)
Two 1/4" x2 1/2" - 6mm x65mm (cannon)

Use of lock nuts is recommended. The model has holes for more screws for extra securing, but the pegs turned out to be more than good enough, however they are still required to tightening the articulations.

Armcannon: https://www.thingiverse.com/thing:5628431

Samus' Varia Suit (articulated) - MP3:C

ankle_guard.STL

ankle_joint.STL

arm_1_A.STL

arm_1_B.STL

back.STL

back_rocket.STL

chest.STL

chest_core.STL

chest_glow.STL

chest_peg.STL

chestplate.STL

elbow_cable_1_black.STL

elbow_cable_2_black.STL

elbow_cover_left.STL

elbow_cover_right.STL

eye.STL

face.STL

foot.STL

forearm_back.STL

forearm_front.STL

hand_articulated.STL

hand_glow_simple_glow.STL

hand_glow_split_black.STL

hand_glow_split_glow.STL

hand_simplified.STL

head_connector.STL

helmet_half.STL

hip_back.STL

hip_front.STL

hose.STL

index_1.STL

index_2.STL

index_3.STL

jetpack.STL

knee_1.STL

knee_2.STL

leg1_inside.STL

leg1_outside.STL

leg2_inside.STL

leg2_outside.STL

leg_1_glow_1.STL

leg_1_glow_2.STL

leg_1_ring.STL

leg_2_glow.STL

leg_2_glow_inside.STL

leg_2_glow_outside.STL

leg_2_ring_inside.STL

leg_2_ring_outside.STL

middle_1.STL

middle_2.STL

middle_3.STL

neck_peg.STL

pauldron_connect_peg.STL

pauldron_end.STL

pauldron_half.STL

pauldron_peg.STL

peg_1.STL

peg_round.STL

pelvis.STL

pinky_1.STL

pinky_2.STL

pinky_3.STL

ring_1.STL

ring_2.STL

ring_3.STL

shoulder_1_black.STL

shoulder_2_black.STL

shoulder_connector_black.STL

thumb_1.STL

thumb_2.STL

thumb_3.STL

toe_bend.STL

torso-chest_lock.STL

torso.STL

visor.STL

visor_thin.STL

wrist_black.STL

GROUP_arm_1_R-L.stl

GROUP_forearm.stl

GROUP_pauldron_halves.stl

GROUP_fingers.stl

GROUP_helmet_halves (copper).stl

GROUP_shoulder_1 (black).stl

GROUP_shoulder_2 (black).stl

GROUP_ankle (black).stl

GROUP_feet.stl

GROUP_knees (black).stl

GROUP_leg_1_glows.stl

GROUP_leg_2_glows.stl

GROUP_leg_rings (black).stl

GROUP_toe_&_guard.stl

This is a new version of my old Quadraxis figure made in 2020, it's much larger and faithful to the original boss. In keeping with the spirit of the previous version, I modeled every part myself, this time using the gamecube files as a base reference to keep every part proportional to its original counterpart (some vertices are an exact match, but 99% of the geometry is new). Also decided to reutilize the ankle articulation from the Samus figure, and repurpose it as the joint for every leg.

The entire figure is hollow to house the LED strips, the wires and the controller boxes, I used the electronics that come with the regular strips, but there is plenty space inside the head for an arduino board.

The assembly it's held together with a combination of pegs and 3/16" (M5) screws of various lenghts, these are as follows:

SIX 2 1/2" (60mm) for the knees and body
TWELVE 1" (25mm)  for the hip joints and leg 1
TWO 1 1/2" (40mm) for the body
ONE 2" (50mm) for the head

This fella occupies roughly half a cubic meter of space, keep that in mind if you ever decide to make one for yourself, that being said, it should be possible to scale it down to a more reasonable size, but know that the pegs for the transparent pieces will not work anymore because they are already very small, glue will be require to join these.

Files with a G in the title are groups of pieces, including both regular and mirrored parts, the x will indicate how many times that group needs to be printed. All parts and groups have been made to fit in a 200x200 bed, any missing group is due to the combined size being larger than this (leg 3, for example).

The head comes with both right and left halves, the body and leg halves are all for the left side, these pieces must be duplicated and mirrored in the slicer.

Most pieces are black or dark grey, with other colors specified in the name.

View the PDF for assembly instructions.

Print Settings:
Printer brand: Hellbot
Printer: Hellbot Magna 2 300
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 10%
Filament brand: GST, Kodak, Grilon3, Printalot
Filament color: Black, Transluscent, Red, Gold/Copper
Filament material: PLA

Notes:
Base is blue, swapping to gold filament for the S, but it can be made in any color.

I used Kodak's "Enhanced PLA" for all pegs, hip pieces, knuckles, ankles, and knee connectors. The pieces have a better finish than the regular PLA, but support is harder to peel off.

Post-Printing
Use the various grooves and circles to paint with acrylic. Circles and wedges are red, lines are grey.

Quadraxis V2 - Metroid Prime 2

ankle (red).STL

Base.STL

DamianVA87

Achievements

Debutant

Sequoia