AMS / MMU and color swap editions are included. Print with .2mm layers. I also use .3mm line widths but it's up to you, some lines are fine, check in the slice before you print, at least use .3mm line widths for the first layer. Colors go till 1mm. I use 6 bottom layers the 6th seals the colors back. There is a separate backer piece, I did this to allow you to select the color of the backside, most will make this black. AMS / MMU version prints face down on the plate. If you bring in the stl's all at once it will ask if you want to resize the yellow, say NO. There are 3mf files to make it easy if you have a bambu. I only printed the AMS version but verified the color swap version. For the color swap start with Black until 1.4mm Yellow 1.6mm - 1.8mm Green 2.0 - 2.2 Red 2.4 - 2.6 White 2.8 - 3 I recommend silks or polyterra because they cover well, you only have two .2mm layers.
I hope you enjoy this model. DWTC