tracking pixel
DaddyWazzy_TheCreator

Close Encounter Twist Open Container

by
DaddyWazzy_TheCreator
Follow
Follow
Remix Model
DaddyWazzy_TheCreator
DaddyWazzy_TheCreator
|
Image 3 of 4
Close Encounter Twist Open Container  3d model
DaddyWazzy_TheCreator
DaddyWazzy_TheCreator
|
Image 3 of 4
Close Encounter Twist Open Container  3d model
2D
3D
Makes
Close Encounter Twist Open Container  3d model
Close Encounter Twist Open Container  3d model
Close Encounter Twist Open Container  3d model
Close Encounter Twist Open Container  3d model
This model is restricted by licensing terms. 

Added V2 of the top. noticed a thin area just under the bubble top after printing a few, sorry about that.* Remix of Simple Twist Open Mushroom (generic) by 3DPrinty Updated the bottom part, it was a bit too large. if you have the original version print it at 98 percent and it will fit better. Made the bottom to mimic Devil's Tower like in the movie. Print with .2mm layers for the top, I printed the base with .4mm layers with a .6mm nozzle. Top is Pearly Silver from American Filament Bottom is Galaxy Dark Blue from Polymaker.


26 Likes26 DownloadsApril 8, 2023


26 Likes26 DownloadsApril 8, 2023
This model is restricted by licensing terms.