tracking pixel
DaddyWazzy_TheCreator

AMS / MMU Portland Timbers FC coaster or plaque

by
DaddyWazzy_TheCreator
Follow
Follow
Remix Model
DaddyWazzy_TheCreator
DaddyWazzy_TheCreator
|
Image 1 of 3
AMS / MMU Portland Timbers FC coaster or plaque 3d model
DaddyWazzy_TheCreator
DaddyWazzy_TheCreator
|
Image 1 of 3
AMS / MMU Portland Timbers FC coaster or plaque 3d model
2D
3D
Makes
AMS / MMU Portland Timbers FC coaster or plaque 3d model
AMS / MMU Portland Timbers FC coaster or plaque 3d model
AMS / MMU Portland Timbers FC coaster or plaque - Have a buddy who is a huge fan. Made a set of four coasters for him. Didn't have any gold filament so used yellow. Turned out pretty well. - 3d model
This model is restricted by licensing terms. 
25 Likes26 DownloadsSeptember 20, 2023
This model is restricted by licensing terms. 


The MMU / AMS version of the Portland Timbers FC coaster or plaque

Timbers! Green n Gold!

Designed for either the AMS or any MMU. I printed with a .4mm nozzle with the coaster face down on my X1C using a .24 first layer line width, if you don't you will have gaps in some of the details. Alternately print with a .2mm nozzle. This only applies to the coaster size. As you scale it up for a plaque that is not an issue. Be mindful of the Z thickness, that can stay at 7mm no matter the size.

Printed with PolyTerra cotton white, Bambu green and a generic silk gold


25 Likes26 DownloadsSeptember 20, 2023




This model is restricted by licensing terms. 
25 Likes26 DownloadsSeptember 20, 2023
This model is restricted by licensing terms.