Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4919910.

Hi Ho

a friend asked me while he was not able to find a replacement to make one. And here we are.

Printed it with 58A TPU and it was a little stiff but does the job. If you have harder TPU maybe you have to make the part 2% bigger.

The top hole has 1 layer closed so it can be printed without support, you only have to "drill" the hole after the print into that 1 layer. Or you use the antenna from the "wrong" side to push via the layer.

Nothing else special in this part.

If you need it modified, write me an email.

Thanks for a TIP

Stay safe / Take care Sandor