Stock Fan Shroud Replacement for Better Visibility and Cooling
477 downloads · 5 years ago · Creality Ender 3 V2 Fan Shroud
Uses stock fans and mounts in place of the original shroud.
Offers
Creality Ender 3 V2 Fan Shroud
Uses stock fans and mounts in place of the original shroud.
Offers great visibilty of the nozzle during printing with improved part cooling. This shroud doesn't interfere with 3D/BL Touch or Direct Drive.
Print with supports on build plate, 30% infill.
Stock Fan Shroud Replacement for Better Visibility and Cooling
477 downloads · 5 years ago in  andÂ
X3S SHROUD_MK1D-4.stl
QMB Ender 3 hot-end and part cooler
QMB Ender 3 Microswiss (clone) hot-end and part cooler
Ender 3 v2 stock fan shroud
K2 Satsana Dual Stock Blower Fan Duct Shroud - Ender 3v2 with CRTouch
Anycubic Vyper & Kobra Max Part Cooling Duct UPGRADE! - Improved print quality
Manta MK2 Duct & Tool Head System
Mega Zero Creality MK8 hot end (Ender-3) compatible fan duct
Manta MK2 Ender 3 REMIX
double shroud neptune 2s style (cr10 clone).stl
MDT- Field Stock dressing kit
Manta MK2 Duct & Tool Head System Ender 5 Version
Grey Squirrel Compact Toolhead
Ender 3 Laser Mount
Ender 5 Core XY with Linear Rails MK2
Oculus Trigger Guard.stl
Tronxy X5SA Pro Y-Axis Endstop Mount Extended
Anycubic Mega Zero X-Axis Linear Rail
Wham Bam Mutant Neptune 2 Fan Shroud Adapter.stl
Does anyone know if you can use 40x20mm fans with this? It looks like it shouldn't be a problem but I just want to make sure before I buy some.
I printed with supports and now cant figure out how to put out the mess from the inside of the ducts
You have to change your support placement setting to "Touching Buildpate". It will print fine with just those settings. It will still leave a mess but at least the ducts are clear.
I had to do a cut too, i am curious if this one is updated?
Thanks for uploading.
Couple notes:
I had to cut out a chunk to clear the bolt for the bottom carriage wheel. Doesn't seem to affect the structure.
Since the screw that holds this onto the carriage isn't a self-tapping screw, definitely start the hole before you try to attach it.
I also needed to cut the wire loom back a bit to get the fan wires routed sensibly.