Select a membership plan

10% off
Limited
$9.00
/ month
when billed annually
  1. COMMERCIAL LICENSE: Official Authorization to sell 3D Prints of CraftyKid3D designs, for as long as you hold an active subscription to the Merchant Tier. CraftyKid3D Digital files are NEVER to be resold, shared, or redistributed in any form.

  2. ACCESS TO 6 FILE DOWNLOADS A MONTH: I release on average 2-5+ high quality models every month. Once you are subscribed, you will have access to choose which models you would like to download.

  3. DISCORD ACCESS: In this tier you gain access to our discord server where it is much easier for me to speak with me and engage in the community. We troubleshoot, share our makes, and you are able to request designs.

20% off
All Access
$12.00
/ month
when billed annually
  1. COMMERCIAL LICENSE: Official Authorization to sell 3D Prints of CraftyKid3D designs, for as long as you hold an active subscription to the Merchant tier. CraftyKid3D Digital files are NEVER to be resold, shared, or redistributed in any form.

  2. ACCESS TO ALL FILES IN SHOP: I release on 2-5+ high quality models every month. Once you are subscribed, you will have access to all files in my catalog.

3.ACCESS TO DISCORD SERVER: In this tier you gain access to our discord server where it is much easier to speak with me and engage in the community. We share our makes, tips, troubleshooting, and members can request designs.

Christian L
CraftyKid3D4.1K followers
CraftyKid3D
CraftyKid3D
|
Image 1 of 5
Low-Poly Heart Keychain or Necklace 3d model
CraftyKid3D
CraftyKid3D
|
Image 1 of 5
Low-Poly Heart Keychain or Necklace 3d model
Low-Poly Heart Keychain or Necklace 3d model
Low-Poly Heart Keychain or Necklace 3d model
Low-Poly Heart Keychain or Necklace 3d model
Low-Poly Heart Keychain or Necklace 3d model
Low-Poly Heart Keychain or Necklace 3d model

Low-Poly Heart Keychain or Necklace

This is a low-poly heart keychain/necklace! It is a quick print that you can batch manufacture and sell for at least $10 in my opinion. You can also scale these down to 52% with 5x2mm magnets to make earrings! I will link the materials and settings I used below. For the filament, I used BambuLab Red Sparkle. Setting: 0.4 nozzle, 3 walls, 10% infill, standard supports on.

Magnet size- 10mm wide, 3mm thick- https://a.co/d/4dDvzUS Keychain Rings- At least 1 inch- https://a.co/d/emDug3w


Discussions

Low-Poly Heart Keychain or Necklace

103 downloads · 11 months ago in  and 
Christian L
CraftyKid3D4.1K followers