Select a membership plan

Model is included in this plan
Available now

10% off
Limited
$9.00
/ month
when billed annually
  1. COMMERCIAL LICENSE: Official Authorization to sell 3D Prints of CraftyKid3D designs, for as long as you hold an active subscription to the Merchant Tier. CraftyKid3D Digital files are NEVER to be resold, shared, or redistributed in any form.

  2. ACCESS TO 6 FILE DOWNLOADS A MONTH: I release on average 2-5+ high quality models every month. Once you are subscribed, you will have access to choose which models you would like to download.

  3. DISCORD ACCESS: In this tier you gain access to our discord server where it is much easier for me to speak with me and engage in the community. We troubleshoot, share our makes, and you are able to request designs.

Model is included in this plan
Available now

20% off
All Access
$12.00
/ month
when billed annually
  1. COMMERCIAL LICENSE: Official Authorization to sell 3D Prints of CraftyKid3D designs, for as long as you hold an active subscription to the Merchant tier. CraftyKid3D Digital files are NEVER to be resold, shared, or redistributed in any form.

  2. ACCESS TO ALL FILES IN SHOP: I release on 2-5+ high quality models every month. Once you are subscribed, you will have access to all files in my catalog.

3.ACCESS TO DISCORD SERVER: In this tier you gain access to our discord server where it is much easier to speak with me and engage in the community. We share our makes, tips, troubleshooting, and members can request designs.

Christian L
CraftyKid3D4.1K followers
Follow
CraftyKid3D
CraftyKid3D
|
Image 1 of 4
Flying Dragon Magnets 3d model
CraftyKid3D
CraftyKid3D
|
Image 1 of 4
Flying Dragon Magnets 3d model
Flying Dragon Magnets 3d model
Flying Dragon Magnets 3d model
Flying Dragon Magnets 3d model
Flying Dragon Magnets 3d model

Flying Dragon Magnets

Subscribe for access starting at $10 USD
Get access to this model and 104+ more

These are the Flying Dragon Magnets! I took the Dragons In Flight wall-hanging model I released two years ago, shrunk it down, and redesigned it with a slot for 6x3mm magnets. They make awesome fridge magnets, display magnets, or just fun little fantasy prints to stick around your workspace.

I printed mine using Gold Winter from Jessie (Printed Solid), and the finish came out incredible with the extra shimmer. It's one of my favorite filaments so maybe I'm bias.

Recommended Print Settings

  • Layer Height: 0.16mm
  • Walls: Arachne Walls enabled
  • Walls: 3
  • Infill: 10% Gyroid
  • Supports: Tree Supports ON
  • Outer Wall Speed: 100mm/s
  • Inner Wall Speed: 100mm/s
  • Printer Used: Bambu Lab A1

Each dragon uses around 20g of filament and takes roughly 1.5 hours to print with these settings.

If the wings give you any trouble during printing, try slowing the print speeds down even more for extra stability and cleaner results.

I hope you enjoy the model and have fun printing them! Happy Printing!
-Christian, @CraftyKid3D


Discussions

Flying Dragon Magnets

41 downloads · 28 days ago in  and 
Christian L
CraftyKid3D4.1K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 104+ more