Wall mount pieces for Lego set 75275 UCS A-Wing
2-piece set to mount Lego set to the wall. Wall mount is angled slightly to show the A-Wing set slightly tilted out, to give a different view then a head on/flat view. (Around 20 degrees)
2 pieces separated to allow for easier printing, and to allow for designing and printing alternate mount pieces to allow for different angles/positions. I'm using it to display the A-Wing horizontally but it should also work vertically.
Print WallMount upright with the open slot to the top. (Supports may be required for screw holes depending on printer settings.) Mount piece should be printed with the large flat piece on the heat bed and the Arm facing upwards.Secure WallMount part to the wall via suitable fixing. Open slots should face upwards. Slot Mount piece down into WallMount piece with Arm facing outwards/upwards. Lego Set can be placed onto the Arm piece, slotting cleanly into the opening under the A-wing for the original display stand.
I printed parts in PETG with at 0.2mm with a 0.6 nozzle and have had no issues at all. 4 or 5 perimeters/shells recommended.
CAD files included to allow for modification of pieces if alternate angle/positions are required.