Cinderwing3D

Tiny Turkey

by
Cinderwing3D
Follow
Follow
Remix Model
Cinderwing3D
Cinderwing3D
|
Image 6 of 7
Tiny Turkey 3d model
Cinderwing3D
Cinderwing3D
|
Image 6 of 7
Tiny Turkey 3d model
2D
3D
Makes
Tiny Turkey 3d model
Tiny Turkey 3d model
Tiny Turkey 3d model
Tiny Turkey 3d model
Tiny Turkey 3d model
Tiny Turkey 3d model
Tiny Turkey - Repainted this a little bit into an Australian Bush Turkey edition. Printed at 75% scale with various filaments:
* Prusament Galaxy Black
* eSun PLA+ brown and yellow
* Generic PLA red and white - 3d model
This model is restricted by licensing terms. 

I really excited to get into some winter models but I wanted to release this last Fall one first! I thought you all might like a cute Tiny Turkey for November! After the duck release, my kids have been going crazy for these bird-type models! I also made this turkey have AS MUCH WIGGLE AS POSSIBLE, with 3 body sections, wings, and even feet!

This design, like the duck, is pretty big at 100%. Therefore, it has been successfully tested down to 25% to give you all a better range of sizes! My size preference is 45%! :)

I also included a simple .3MF color file for you all that highlights some of the Turkey's features. I hope you all enjoy this!

Thank you all so much for you support! :)

  • Tracy

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

Commercial License and monthly bonus models: Thangs Memberships Patreon MMF Tribes 3D PRINTING SETTINGS FDM Settings 3 walls 10-25% infill No supports Raft or brim if you have adhesion issues

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.


28 Likes277 DownloadsNovember 1, 2024


28 Likes277 DownloadsNovember 1, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %
SupportsNone
BrimNo
MulticolorAutomatic material system (AMS)
Infill styleGyroid