Cinderwing3D15K followers

Nightwing 2025 Dragon

2.6K downloads · 10 months ago · A rebuilt version of my original Nightwing Dragon to be in the true Cinder style! Featuring multiple

This model is restricted by licensing terms.

View license.

Description

A rebuilt version of my original Nightwing Dragon to be in the true Cinder style! Featuring multiple lunar hooks to hang this new friend from all sorts of places!

Check out the Baby version here!

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Membership and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

For commercial license and monthly bonus models, click here!

Filaments I use! Not an exhaustive list but if I remember, it'll be here! Amazon Affiliate links!

3D PRINTING SETTINGS

FDM Settings 3 walls 10-25% infill No supports Try brims if you have adhesion issues. Models tested between 60-100% generally

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.

Tags:

Community Makes (7)

175% Print, really wish the coloring was better. The head piece doesn't even have the tails set to the right color. Most of the "gems" are body color which looks a bit weird. Overall content with the print, but it could have been so much better. Working on correcting the color issues and reprinting a smaller version. A 711g print resulted in 815g of waste using a relatively small prime tower and .5 multiplier on the flush with purge to infill. Correcting the color would add minimal additional waste as only a the last bit at the top doesn't go through color changes. A multi-headed printer would be ideal.
Filament:
PLA: Burnt Titanium, Translucent, Silk Blue

Had to go with 4 colors because I'm just extra. Took 40 hours....

Such a beauty I love this design! Currently working on an albino version 🦇
Printed 150% on Bambu H2S

Community Makes (7)

Discussions

tkubic12310 months ago

grimor6 months ago

175% Print, really wish the coloring was better. The head piece doesn't even have the tails set to the right color. Most of the "gems" are body color which looks a bit weird. Overall content with the print, but it could have been so much better. Working on correcting the color issues and reprinting a smaller version. A 711g print resulted in 815g of waste using a relatively small prime tower and .5 multiplier on the flush with purge to infill. Correcting the color would add minimal additional waste as only a the last bit at the top doesn't go through color changes. A multi-headed printer would be ideal. Filament: PLA: Burnt Titanium, Translucent, Silk Blue

PrinterOther

Printer modelCreality K2 Plus

Print bed sizeX: 350 mm; Y: 350 mm; Z: 350 mm

MaterialPLA

Layer height0.2 mm

angeliKITTYx10 months ago

cali.rebelgirl9 months ago

Had to go with 4 colors because I'm just extra. Took 40 hours....

PrinterAnycubic Kobra 3

MaterialPLA

jmpnjimbob9 months ago

PrinterSovol SV06

wondrousworksstore9 months ago

Such a beauty I love this design! Currently working on an albino version 🦇 Printed 150% on Bambu H2S

PrinterBambu Lab H2D

MaterialPLA

Layer height0.2 mm

arrora18 months ago

PrinterFlsun V400

sailorgirlinconecticut10 months ago

Already on the printer. Using a lighter silky blue with a silk gold and a black body. I think it’s going to look amazing

Cinderwing3D10 months ago

love it!

amorstreausresprints10 months ago

How long will it take to print with a Elegoo 4 +?

Jordan.brass10 months ago

i get an error that makes me have to fix the modle and lose the painting. is this issue on my end or can you corelate ? error in 3mf

Cinderwing3D10 months ago

What slicer is this? You should be able to ignore it and print as is

Jordan.brass10 months ago

invalid values found in the 3mf - raft first layer expansion -1 not in range tree support wall count -1 not in range please correcxt them in param tabs almost everything i load now does this

Jordan.brass10 months ago

bambu slicer

Cinderwing3D10 months ago

I'd make sure that you are on the most up to date version, that seems to have been a bug with an older version of the slicer, you can also try re-installing it!