Sometimes you just don't want to wear shoes but still do shoe activities in some slides which is why I have invented these for #Elegoo3DPSummer. Printed in Overture 95A TPU, these "Slide Locks" are extremely durable with just enough stretch to be comfortable and add a lot of performance to your slides!

If you have ever tried running, driving, pedaling, or tubing down a river in some slides then you know they aren't exactly the best type of footwear for those activities and you might lose them in the process. Crocs are a pretty good option because of their "4 wheel drive" mode, and I may have taken some inspiration from that capability. Now with Slide Locks you can breathe easy knowing your slides aren't going anywhere!

I like to print with a big nozzle so these are designed to be printed with a 1mm nozzle at .5mm layer height and 1mm layer width, you may be able to use a regular .4 or other size nozzle but it has not been tested so ymmv. There is only one file, I just mirror it in the slicer to have one for each foot. 

4 Wheel Drive Upgrade For Slides/Flip Flops (TPU) SLIDE LOCKS

4wdslide.stl

Laughing Goblin Emote from Clash Royale

Bored Valkyrie Emote from Clash Royale

Thumbs Up King Emote from Clash Royale

Chicken Emote from Clash Royale

Crying King Emote from Clash Royale

CryingKing2.stl

This emote costs less to print than it did to buy in-game.

Twerking Pig Emote from Clash Royale

If you have played Clash Royale then you have seen this emote countless times. Now you can BM irl with this palm-sized Heheheha emote. 

I designed these with the purpose of being filled in with paint. I don't have mine painted yet, but if you do paint it please add a picture here for me.

Intended to be printed with 0.4 line width.

Heheheha Clash Royale King Emote

Included are large and medium size vented funnels, and a small regular funnel. The vented funnels are intended to prevent bubbles from slowing the flow of liquid. 

These funnels are quite easy to personalize if you are familiar with cad software, the ones I made have my name extruded so they don't walk away from my toolbox :)

Vented Funnels

LargeVentedFunnel.stl

This is a funnel that you can set down or just hold after using without dripping all over. Included are 2 files, one large funnel, and another with 2x thicker walls intended for shrinking in the slicer (tested at 50%).

Print Settings I used:
0.2 Layer Height
0.4 Layer Width for 2mm total wall thickness and 5 walls.
Infill 20% but doesn't really matter, add more walls if there are any spots of infill you don't want.

I made these for myself to use in a shop and they are working well so I wanted to share it. Works with most vehicles including the angled Honda engine pictured.

Set Down Oil Funnel

SetDownFunnelLarge.stl

Included are 2 versions of this bat, one with a recessed outline, and one totally flat. 

2D Bat Halloween Decorations

2DOutlineBat.stl

A large and slightly smaller bat that snaps onto a ring. Included are 7 size rings, 2 of which are thinner for a "one size fits all" flexible fit. 

I have printed this without supports at .15 and .2 layer heights and infill at 20% but it may be fine with less. 

If you have any suggestions please let me know in the comments! I like to make models like this to hone my skills and will be passing some of these out to trick-or-treaters on Halloween. 

Bat Rings For Halloween

LargeBatRing.stl

Included are 2 different versions of this spider. One totally flat, and one with a slightly recessed outline .4mm deep for a different look up close.

2D Spider Halloween Decoration

2DSpiderOutline.stl

Updates: added 2 new ring sizes that are thinner and bend easier for more of a "one size fits all" in 14mm and 18mm. Also changed the legs on the small and medium size spiders to be better optimized for printing at .4 line width. 

A large, medium, and small spider that snaps onto a ring for you to wear on Halloween. Included are 7 different size rings ranging from 13mm to 23mm for the right fit. 

I would recommend to make sure the ring fits your finger before joining the spider because it is pretty much permanently attached at that point. 

The jaws need some tiny supports, but everything else printed fine without supports. 

This was a fun little project for me so I hope you enjoy it too. I will be handing these out with candy on Halloween to spread some 3d printing joy. 

Since this spider has a snap fit design, I may add more accessories if there is demand for it. Let me know in the comments if there's something you want to snap this spider onto and I'll try to make it happen. 

Spider Rings for Halloween Costume

14mmOSFARing.stl

18mmOSFARing.stl

ring13mm.stl

Ring15mm.stl

Ring17mm.stl

Ring19mm.stl

ring21mm.stl

ring23mm.stl

SpiderBody.stl

SpiderLarge.stl

SpiderSmall.stl

This calibration corner has rounded ends on the X and Y axes to prevent corner bulge issues from interfering with accuracy. 

More Accurate 100mm XYZ Calibration Corner

(Update: After over a month of use the male threads on the base have stretched a bit allowing the shower head to be turned a bit too far. I have added a new piece with the female threads rotated 15 degrees to compensate for this and it has lined up perfectly for me while using the same old base piece secured to the wall.)

Simple mount for a handheld shower head with adjustability that can be locked in place and secured with a knurled nut. 

I designed this to fit around a 14.2mm shower hose with a tapered nut that is roughly 24.55mm at the widest, 20.75 at the narrowest, and 40mm long. 

The in-slicer pictures show the orientation I had the best results with printing but ymmv. I printed in standard PLA at .16 layer height and 20% infill and standard cura ender 5 settings with tree supports. 

I split the base into 2 pieces so I would advise anyone considering this to print the smaller pieces first and make sure they fit before printing the larger piece. The gears are a tight fit and may require some manipulation, but mine loosened up very nicely. 

This was mounted to the wall with the thick 3m double sided tape (heat gun used to heat the wall and tape for best adhesion) and 2 screws.

Adjustable Shower Head Mount

Base-Main

Base-Gear-15Degree.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Chrismaster

Achievements

Seedling

Up and Coming