Select a membership plan

30% off
Vip Access
$7.00
/ month
when billed annually
✅ Welcome pack: 5 FREE models

Rewards:

  • Welcome Pack 20+ models and Clickers
  • Commercial License
  • 3+ New designs Every Month
  • Access to Everything Released Here
  • Exclusive Discord Membership
  1. COMMERCIAL LICENSE:

As an ACTIVE supporter(ChibiCult VIP ACCESS $10), you will have a Commercial License to legally sell PHYSICAL prints of any of the designs. UPON CANCELLATION of the subscription, THIS COMMERCIAL LICENSE EXPIRES.

Digital files cannot be modified, shared, resold or listed for free.

You are responsible for what you sell, as we cannot control each person's print quality.

  1. FREE DESIGNS:

I will release free designs every month on Patreon. As a new member, you will have access to these designs as I create them.

  1. Thangs EXCLUSIVE:

Each month, one or more files can go to the exclusive designs folder that are part of the welcome pack. All new members have full time access to the welcome pack.

  1. EXTRA DESIGNS:

The extra models are experiments to test new techniques and new themes, they are not part of the 3 models of the month! They can go into the experimental folder so that we can do some experiments and improve our community and our models.

  1. CONNECT – Gain access to our exclusive Discord community, where you can receive printing advice, share and explore future design ideas, get social media tips, showcase your creations, and chat directly with me! Join a vibrant, supportive community that’s all about positivity, collaboration, and helpful feedback.

    Terms & Conditions

    Upon Cancellation of the Subscription, The Commercial License Immediately Expires.You are not allowed to sell, share, alter, or remix any digital file you get from me. You are only authorized to sell the 3D Printed models. Not digital files. No Refunds After subscription Terms & Conditions are subject to revision.
ChibiCult
ChibiCult249 followers
ChibiCult
ChibiCult
|
Image 1 of 4
Carrot Fidget Clicker  3d model
ChibiCult
ChibiCult
|
Image 1 of 4
Carrot Fidget Clicker  3d model
Carrot Fidget Clicker  3d model
Carrot Fidget Clicker  3d model
Carrot Fidget Clicker  3d model
Carrot Fidget Clicker  3d model

Carrot Fidget Clicker

Say hello to the Carrot Clicker in a Pot – the cutest little stress-buster around! 🥕🌸 It’s a fidget clicker shaped like a carrot, popping out of an adorable flower pot. Click it, bop it, and watch your stress melt away with every satisfying press.

FOR PERSONAL USE ONLY.

FOR COMMERCIAL LICENSE (only physical prints) GET IT HERE

Important : Read Before Printing

For the best possible results with your finished clicker, strong bed adhesion is essential. We recommend thoroughly cleaning your print surface—whether that’s with soap and water or following your printer manufacturer's specific guidelines—before getting started. Any Cherry MX Compatible Mechanical Keyboard Switches are compatible. You would need to Bend or Clip the Metal Contacts below the switches with pliers. (Only then the switches latch flush onto the base of the clicker) Print the cap facing "Down" like in the picture provided. The mask details are raised a little bit on the cap. 3D Printing Settings: Layer Height: 0.2mm (recommended) External Perimeter (Outer Wall): 0.33mm (recommended) First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended) Only one wall on first layer: True (recommended)

CLICKER INFO Any Cherry MX Compatible Mechanical Keyboard Switches are compatible. You would need to Bend or Clip the Metal Contacts with pliers TESTED Switches. Kailh Box Thick Clicky Jade Switch Cherry MX Blues/ Reds / Browns Gatreon Yellow Linear Switches Glorious Panda Yellow Tactile Switches

Filaments Used BambuLab PLA Polymaker PLA


Discussions

Carrot Fidget Clicker

104 downloads · 1 year ago in 
ChibiCult
ChibiCult249 followers