CR-10 Bed Leveling Test
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5277843.
This is a super quick, super low filament usage Test Print which you can/should use to dial in and adjust the corners for perfect leveling.
My recommended steps:
-
measure the x-axis gantry on both sides (since it is dual-z steppers) to ensure it is perfectly level to the frame. Disable the steppers and adjust as necessary.
-
manually level with a piece of paper on all 4 corners, then auto-level (if you have a CRTouch/BLTouch) and save to eeprom.
-
use the attached .STL file (super quick, super low filament usage) to run a test print and adjust the corners as necessary during it.
-
use the 'Tune | Babystep Z" as necessary when printing the skirt to ensure that you are getting good 'squish'
CR-10 Bed Leveling Test
CR-10 Bed Level Test
CR-10 2020 Top Mount LED
bed leveling test
CR-10 Ultimate Bed Leveller
Ultimate Ender 3 Max / Cr-10 Bed Leveling Knob Remix
bed level V2 test
Bed Level Test (Scalable)
First Layer Porn Bed Level Test
bed level test print 4mm.stl
Bed Leveling Test
3D Printer Bed Leveling Test
Bed Leveling Test Print
K1 bed level test
Bed Leveling Test
Ender 3 bed level test (dual extrusion) / offset calibration
Bed level test
kobra 3 bed leveling test
Ender 3 Bed Level Test
235 x 235 16 Point Bed Level Test
