Select a membership plan

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Charles R
CharlesRegaud2.9K followers
CharlesRegaud
CharlesRegaud
|
Image 1 of 4
SPINNER | Print-in-place fidget hand spinner 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 4
SPINNER | Print-in-place fidget hand spinner 3d model
SPINNER | Print-in-place fidget hand spinner 3d model
SPINNER | Print-in-place fidget hand spinner 3d model
SPINNER | Print-in-place fidget hand spinner 3d model
SPINNER | Print-in-place fidget hand spinner 3d model

SPINNER | Print-in-place fidget hand spinner

SPINNER | Print-in-place fidget hand spinner

Here is a 100% print-in-place fidget spinner to relieve you from all stress, as if staring at your 3d printer wasn't enough. Come on, we've all done it.. "one more layer and after that, I swear, I'm gonna go to bed!"

Tolerance is key, so I made 3 STL files, one for each of the following tolerances:

  • 0.2mm (the one I printed and in the video)
  • 0.25mm
  • 0.3mm.

Pick the ones that'd work best for your printer,

The 0.2mm one works fine but you'll have to wiggle the bearings a little to get them unstuck. And adding a little lubricant helps too (I applied the grease I use for the 3d printer).

Happy printing!

DIMENSIONS | Ø 90mm x H 8 mm

Printing | ~1.5h

3D PRINT SETTINGS Print-in-place flat on the side, 100% without supports or need for adhesion brim.

Resolution: 0.1~0.15mm / layer

Build adhesion type: None

Supports: None

Infill: gyroid 30~50%


Discussions

SPINNER | Print-in-place fidget hand spinner

267 downloads · 2 years ago in 
Charles R
CharlesRegaud2.9K followers