3D PRINT SETTINGS:
All STL files are already oriented properly.

They can be printed with either a 0.4mm or 0.8mm nozzle.

You need to print:
• 8 modules in vase mode (settings below)
• a socket plate, the central ring onto which the modules are mounted
• 8 small dovetail locks to secure the modules in position

MODULES:
The 3D model is full. This is normal.
You need to "empty it" by printing it vase mode (spiralize outer contour / spiral vase).

For 0.8mm nozzle:
• 0.4mm layer height
• default 0.84mm line width
• 12 bottom layers (adjust if using another layer height)

For 0.4mm nozzle:
• 0.3mm layer height (ignore the “0.28mm limit” warning)
• 0.8mm line width
• 16 bottom layers

SOCKET PLATE & DOVETAIL LOCKS:
Print them together on the same build plate using standard print settings.

Happy printing!