Select a membership plan

Model is included in this plan
Available now

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Model is included in this plan
Available now

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Charles R
CharlesRegaud2.9K followers
Follow
CharlesRegaud
CharlesRegaud
|
Image 1 of 9
SAKURA | Pendant Light E26/27 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 9
SAKURA | Pendant Light E26/27 3d model
SAKURA | Pendant Light E26/27 3d model
SAKURA | Pendant Light E26/27 3d model
SAKURA | Pendant Light E26/27 3d model
SAKURA | Pendant Light E26/27 3d model
SAKURA | Pendant Light E26/27 3d model
SAKURA | Pendant Light E26/27 3d model
SAKURA | Pendant Light E26/27 3d model
SAKURA | Pendant Light E26/27 3d model
SAKURA | Pendant Light E26/27 3d model

SAKURA | Pendant Light E26/27

Subscribe for access starting at $10 USD
Get access to this model and 105+ more

SAKURA | Pendant Light E26/27

After designing the scalable SAKURA pencil holder, I kept looking at it from all angles and thought it would make a great pendant light.

So here it is! A floral pendant light built from three intersecting circles, gradually shifting shape throughout the shade.

Light bounces within the intricate inner profile, creating subtle variations that change with the viewing angle.

It prints in vase mode and comes in 2 sizes:

DIMENSIONS (Small) | Ø209 x H150mm DIMENSIONS (Small) | Ø255 x H180mm

You can get the power cords from Amazon here:
 For Europe: E27 cord:  https://amzn.to/3OVrZjK

For the US: E26/E27 cord: https://amzn.to/434c0qZ

3D PRINT SETTINGS: All STL files are already oriented properly. You need to print 2 parts:

  • one shade (pick the size you want)
  • one base for E26/27 light sockets. No supports or adhesion brim needed.

THE SHADE: You can print the shade in vase mode.

For a 0.8mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.4mm/layer • Line width: 0.8 to 1mm • Bottom shell layers: 6 (or adjust it to cover a total of 2.4mm if you use a different layer height than 0.4mm)

For a 0.4mm nozzle: • activate "vase mode" (spiral vase or spiralize) • Layer height: 0.2mm/layer • Line width: 0.8 to 1mm • Bottom shell layers: 12

I also added some fuzzy skin to add some surface texture: • fuzzy skin point distance: 0.8mm • fuzzy skin thickness: 0.3mm.

BASE: No particular tricks for the base. I used a 0.4mm nozzle, 0.2mm per layer and 15% infill. Printed in PLA.

Happy printing! Happy printing!


Discussions

SAKURA | Pendant Light E26/27

16 downloads · 3 months ago in  and 
Charles R
CharlesRegaud2.9K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 105+ more