tracking pixel
CharlesRegaud

REGATTA | Napkin Rings, customisable

by
CharlesRegaud
Follow
Follow
Remix Model
CharlesRegaud
CharlesRegaud
|
Image 7 of 8
REGATTA  |  Napkin Rings, customisable 3d model
CharlesRegaud
CharlesRegaud
|
Image 7 of 8
REGATTA  |  Napkin Rings, customisable 3d model
2D
3D
Makes
REGATTA  |  Napkin Rings, customisable 3d model
REGATTA  |  Napkin Rings, customisable 3d model
REGATTA  |  Napkin Rings, customisable 3d model
REGATTA  |  Napkin Rings, customisable 3d model
REGATTA  |  Napkin Rings, customisable 3d model
REGATTA  |  Napkin Rings, customisable 3d model
REGATTA  |  Napkin Rings, customisable 3d model
REGATTA  |  Napkin Rings, customisable 3d model

REGATTA | customisable Napkin Rings

REGATTA Napkin Rings add a personalized touch to any meal, allowing each family member to choose their own color combination:

  • one colour for the ring
  • one colour for the printing filament strips you can mount around it
  • or a rainbow of filament strips to make it more fancy! It's all up to you.

Just cut four 16cm (6.29") strips of filament and slide them into the holes around the ring. There are 3 open quarters around the ring, where the filaments are visible, And one quarter is closed, concealing the open ends of the filament strips that you can fix with a bit of glue if you want.

Happy printing!

DIMENSIONS | W 55 mm x H 20 mm

3D PRINT SETTINGS The STL file is already oriented properly. It prints without supports and doesn't need adhesion brim.

Resolution: 0.3mm/layer or less Wall line count: 2 Infill: 10~20% Build adhesion type: None Supports: None

The rings on the pictures were printed with some "fuzzy skin":

  • fuzzy skin thickness: 0.2mm
  • fuzzy skin point distance: 0.8mm

1 Likes12 DownloadsMay 22, 2024