CharlesRegaud2.8K followers

RAMA | Kitchen rail, hook & planter 3d model

RAMA | Kitchen rail, hook & planter

77 downloads · 1 year ago · **RAMA | Kitchen rail, hook & planter** Here is a complete collection of accessories for kitchen

Description Instructions

RAMA | Kitchen rail, hook & planter

Here is a complete collection of accessories for kitchen rails.

This FREE set includes wall brackets for Ø18mm or 3/4inch wooden rails, plus hanging planters and hooks. (The wall brackets work with Ø4 to 5mm screws, or #8 - #10 screws, and 1" or 30 to 40mm anchors)

On the rail you can also mount:

a magnetic knife rack
a cookbook or ipad shelf
a dishsoap and spong holder
a drip tray to dry your cutlery
a spice rack
a towel holder

You can get the wooden dowels/rails on Amazon here:

For the US (Ø3/4 inch): https://amzn.to/4klPfVE

For Europe (Ø18mm): https://amzn.to/3T5q4dW

3D PRINT SETTINGS: All STL files are all already oriented properly. No need for supports, or brim.

The hangers print on their side and don't need support, even for the overhanging part.

Layer height: 0.2mm/layer Wall line count: 2 Infill: 15 to 20% Build adhesion type: None Supports: None

To mount the wall brackets and wooden rail:

mark locations for the holes on your wall, every 40 to 50cm or so depending of the length of your wooden rail. So for a 1m or 40" rail you'd have 3 brackets. Leave about 5cm or 1.5" of wooden rail sticking out past the brackets at both extremities.
drill holes in your walls at the right diameter for your anchors (diameter about Ø3/16" or Ø5mm, 30 to 40mm deep).
place the inserts in the wall
fix the "dovetail" pieces on the wall with the scews
slide some wall brackets on the wooden rail
then place the rail parallel to the walls and slide the brackets onto the dovetails. (or you could first put 1 bracket onto 1 dovetail, slide the wooden rail inside, and THEN put the additional 2 brackets on the rail and slide them onto the dovetails. Maybe easier that way...).