PFEIFER | Mini Power Whistle

1.7K downloads · 2 years ago · **PFEIFER | Mini Power Whistle** Meet PFEIFER, a tiny but very very powerful pebble-shaped whistl

Description

PFEIFER | Mini Power Whistle

Meet PFEIFER, a tiny but very very powerful pebble-shaped whistle.

It takes only 10g to print and is available in 2 sizes, Regular and Mini, and a variety of tones:

Regular in mid-tone 2.5KHz
Regular in high-pitch 4KHz
Regular in dual tone (2.5KHz + 3.5KHz)
Mini in high-pitch 4KHz
Mini in mid-tone 2.5KHz

Our cute rescue dog responds surpisingly well to the 4KHz.

Don't mind the print quality on the pictures. I live in Taiwan (but I'm French.. long story..) and raining season just kicked. It's so humid it's almost impossible to get my prints right.

Anyway... Happy printing!

V2 UPDATE: The keyhole on V1 versions was a bit too small, so was enlarged on V2.

DIMENSIONS (Regular) | W 35 mm x D 15 mm x H 50 mm

DIMENSIONS (Regular) | W 30 mm x D 15 mm x H 36 mm

PRINTING | 30min

All STL files are already oriented properly.

Infill: 20% Wall line count: 2 Resolution: 0.2~0.3mm/layer or less (the bases in the pictures were printed in 0.2mm/layer) Build adhesion type: Brim 4mm Supports: None

Tags:

Community Makes (1)

I won't say it's an easy impression, you need to have a good grip on the bed, but it's the fundamentals.

Apart from that, the whistle is perfect, beautiful and loud.

Community Makes (1)

Discussions

EdWong2 years ago

I won't say it's an easy impression, you need to have a good grip on the bed, but it's the fundamentals. Apart from that, the whistle is perfect, beautiful and loud.

CharlesRegaud2 years ago

Looks good! I recommend using a brim at the base to anchor the model strongly to the bed.

EdWong2 years ago

Yea, I used a large brim to print them, but my zoffset wasn't that good, retuned it and now I've printed 4 of them without issues.

One of them was muffled though. I cleaned it with a small pipe cleaning brush and a tooth pick with interdental brush. Sound way better, probably some inside stringing.

dapplegrey19716 months ago

Nice whistle,easy to produce and fast,,had no issues what so ever..Thanks for sharing!

CharlesRegaud6 months ago

Glad you like it! Post a picture of your make if you have a minute to spare!

rebecca.schmidt00015 months ago

I am not seeing your copyright license on this. I work for a school and we sell 3D prints as part of a fundraiser for our student FBLA chapter. I want to honor copyright, so wanted to check if we could sell models we print.

CharlesRegaud5 months ago

Hi! I put this model for free, without copyright. So you can sell prints of those whistles if you want. But cannot resell the STL file though!